Amusement equipment refers to a new project that can provide functions that can provide amusement and play. The play equipment is a new project that is carefully designed for childrens naughty.Its novel ideas, unique overall shapes and scientific and technological content jump, climbing, drilling, slippery, sliding, swinging, rolling, shaking and other comprehensive amusement facilities.
Introduction to amusement equipment
Amusement equipment refers to a new project that can provide functions that can provide amusement and play. The play equipment is a new project that is carefully designed for childrens naughty.Its novel ideas, unique overall shapes and scientific and technological content jump, climbing, drilling, slippery, sliding, swinging, rolling, shaking and other comprehensive amusement facilities.
Amusement equipment can be classified as: large amusement equipment, small and medium -sized amusement equipment, inflatable toys, small preschool education, etc.
Safety standards for amusement equipment
Security insurance measure
The overall structure should be firm and reliable in the multiplier part of the amusement facilities in the air, and its important parts should take insurance measures.
The number of steel wire ropes or chains used for hanging people must not be less than two.The connection with the seat part must be considered to maintain a balance when one is open.
The door with a closed cockpit more than 1m from the ground must set up two locking devices or a locking device with insurance that cannot be opened inside.There should be a lock device with insurance with non -closed cockpit imports and exits.
When the amusement facility is running, the power power supply is suddenly power -off or the equipment fails, and it must be equipped with an automatic or manual emergency parking device.
After the operating facilities fail during operation, there should be measures to guide the passenger.
Take the safety restraint device
When the amusement facility is running, the passenger may be moved by the mobilization, collision or throwing, and slipping in the ride, and there must be a ride -binding device.For amusement facilities with greater danger, two independent restraint devices should be considered if necessary.You can use seat belts, safety bars, gears, and so on.
Resting device: It should be reliable and comfortable, and the parts that are directly in contact with the passengers have appropriate softness.The design of the restraint device should prevent the passenger from being trapped or crushed at a certain part of the person. It should be easy to adjust and the operation is convenient.
Safety belt: It can be used alone on facilities that are slightly swinging or slower at the speed of raising, no flip and no dangerous danger. The use of seat belt should generally be equipped with auxiliary handle.For fierce sports facilities, the seat belt can be used as an auxiliary restraint device.
Safe pressure bumper: When the amusement facilities are running, when the risk of being thrown out by the passenger may set the corresponding type of safety bumper; the safety pressure bar itself must have sufficient strength and lock force to ensure that tourists are not thrown out or they are not thrown out orFalling, and always locked before the device stops running.
Safety requirements for safety fences and platforms
The safety fence should be set up and exported separately, and a guide fence should be provided at the import.There should be anti -slip measures on the platform.
The opening direction of the safe fence door should be consistent with the direction of the travel (except for special circumstances).To prevent damage to the hands of personnel when closing the door, the gap between the door and the column should be appropriate, or other protective measures should be taken.
The amusement facilities that are on the side of the running side should not be higher than the platform of the platform 300 mm.The height of the entrance and exit of other amusement facilities by part of the entrance and exit should be convenient for up and down.
Other security requirements
The amusement facilities should set a eye -catching safety sign at the necessary places and parts.Safety signs are divided into four types: prohibited signs (red), warning signs (yellow), instruction signs (blue), and prompt signs (green).
Where the passengers can touch are not allowed to have exposed sharp edges, sharp corners, burrs, and dangerous protrusions.
The culvert passed by the amusement facilities should use materials that are not easy to fall off, and the decorations should be fixed and firm.
Play equipment purchase needs to be known
Providing tourists with safe amusement services, the most important thing is that the player equipment produced by units with business licenses has certain safety.
First of all, check the business license to see if it is true. There is no seal of the Industry and Commerce Bureau. There are no annual inspections. The general annual inspection date is one year later. The second is to see how the registered capital is on the business license.It is the company or the factory. Is there any formal office space and whether there are a certain area of ??production workshop, how much workers, these are the elements of the strength of a factory.Essence

Related tags： Sports