UV glue is not our common transparent glue and adhesive tape. It is a liquid glue that is used to paste some large items, such as glass, automobile parts, circuits, and so on.The use of UV glue is also wide in our daily life. Many maintenance shops and glass manufacturers basically use UV glue every day.
How to remove UV glue
1. UV glue will be softened after heating, and it is easy to peel off.The maximum temperature resistance of UV glue is heated, and UV glue can be removed.2. Heat with chromium iron. Note: This method is used for glass products. Plastic products should not be used, and the temperature is not controlled.3. Acetone and alcohol are a good way to remove UV glue. The acetone will be cleaned a little.It can only be used for glass, PC material, and 10 cannot be used.4. Physical methods.Be careful and scrape it with a little stuff like a blade.This kind of adhesion for UV glue is not very good, it is easy to scrape off, and then wash it with alcohol.
How to curing UV glue
The efficiency of UV light irradiation is determined to enter the solidified material to the transmitted photon to start the difficulty of triggering the molecular trigger molecular.UV solidification determines the collision of photons -molecules.Light trigger molecules spread evenly through the material, but photons are different.In addition to the characteristics of the UV light source, the solidified film also has optical and thermodynamic characteristics.They interact with radiation energy and have a significant impact on the process of curing.The spectral absorption rate, energy is the role of material absorption of the wavelength within the gradually increased thickness.The more energy absorbed near the surface, the less energy obtained.But this situation varies with the wavelength.The total spectral absorption rate includes all the effects of photocatalysts, single molecules, clustering and additives including the effect of pigment.When the solidified product contains a layer of transparent material on the UV can be solidified, its absorption hinders light energy.This is a layers of pressure, lens bonding, and drug assembly. Of course, there are DVD bonding, which are commonly used.It is important to understand the spectral dissemination characteristics of transparent materials to choose the most effective spectrum of solidification through them.Under normal circumstances, the selection of long wavelength UV lights, combined with long -wavelength photoretical hair, is the key to successful solidification through materials like PC.
UV glue use
● Glass products, glass furniture, electronic scale bonding ● Crystal jewelry craft products, fixed inlaid ● Transparent plastic craft products bonding, PMMA/PS ● Painting and sealing of the string column/relay/capacitor and microcontroller ● Printing circuit board (PCB) Paste the surface element ● The integrated circuit block on the printing circuit board bonds ● The fixation of the coil wire terminal and the adhesion of the components
How to use UV glue
(1) Clean the surface of the intended objects to be bonded; (2) Drop a sufficient UV glue into the working surface; (3) Press it on the working surface to allow the UV glue to spread evenly; (4), use it withUV light (ultraviolet rays) radiate for 5-10 seconds to achieve its preliminary solidification; (5), wipe the overflowing UV glue (clean and bond surface); (6), then use UV light (ultraviolet rays) to illuminate for 1-2 minutes(7) Static work, more than 3 hours to reach 100%completely solidified.
What is UV glue
UV is the abbreviation of English Ultravioletray, that is, ultraviolet light.UV glue, also known as light -sensitive glue and ultraviolet optical curing glue, is a type of adhesive that can only be solidified by ultraviolet light. It can be used as a adhesive, and it can also be used as a paint, coating, ink and other glue.

Related tags： Houseware