The lamp head refers to the interface connected to the end of the electric light line and for installation of light bulbs. It needs to be used with caution.Electric light sources mainly use lamp heads and lamp seat naming methods.The lamp head is the end of the bulb, which is the connection part of the light source and the external power supply.
Lantern
Let me introduce to you what is better for the lamp head brand.Brand 1: Bull Mingguang Lantern This white lamp holder shows the classic elegant texture, showing the noble and natural temperament of the entire space.And the contact point of this lamp head uses high -quality metals, and the conductive performance is very good.In order to meet the power cords of different models, greater space has been added to the lamps launch port.Brand 2: The material used by Huiyang ceramic lamp head Huiyang lamp head is pure ceramics, and ceramics have the characteristics of insulation and high temperature resistance.And the light mouth is pure copper, which is very good in conductive performance.The overall design is simple and characteristic, and the installation is convenient. It is a lamp head that can be selected.Brand 3: Noble High -temperature ceramic lamp head Noble lamp head has a lot of effort. The material of the lamp seat uses PC plastic. The material of the lamp head is ceramic, and the material of the lamp mouth is high -quality copper metal.Therefore, it is a better one in terms of appearance and electrical performance.This lamp head is more suitable for shopping malls, office buildings and other occasions.
Processing lamp head
In order to allow everyone to buy a good light bulb, Xiaobian found some information related to the lamp head processing manufacturer on the Internet. Here I would like to say a few manufacturers with better processing lamp head for your reference.Light head processed by Suzhou Xinyu Hardware Tool Factory processed by spectrum lighting Co., Ltd.
Lamp head price
The price of the sunlight head is generally around 55 yuan!
Lamp head wiring
The first step is to prepare tools, mainly including wires, screwdrivers, bulbs, light mouths, tape, and stripper.For the wire, it is enough to use a 1.2 -square -meter ordinary wire. If you still need to connect to the electrical appliance, you can also consider using a 2.5 -square wire; the quality of the light mouth should be better, as well as the bulb.In the second step, we need to peel out the head head with a threadr, and it is usually one centimeter to peel it out.When we stripping the line, we should pay attention to the one that cannot be peeled too long, and of course, it cannot be peeled too short, so that there may be problems.The third step is to check the corresponding connection and perform a fixed screw.We must ensure that the screws must be tightly connected and we cannot loosen.Then you need to check whether the line head connected in the center is connected. If so, you must deal with it.
Lantern model
There are many ways to classify the head of the head. From the installation method, it is divided into mounts, snail mouths, etc. from the installation method.E14, E27, E12, E26 and other Es are usually: snail mouth lamp seats.At the beginning of Gu10, the finger of GU is the bayonet type used in our daily use. GU: G means that the lamp head type is inserted, U represents the U -shaped part of the lamp head, and the subsequent numbers indicate the center distanceEssenceThe lamp head model is divided into electric wood, plastic, metal, ceramics, etc. according to the material.

Related tags： Houseware