Electric film is divided into high temperature and low -temperature electric film.High -temperature electric film is generally used in electronics and electronics, military, etc., and now the electrical film produced by technology.Low -temperature electric film is a semi -transmitted polyester film that can be heated after power -on. It is made of conductive special ink and metal carriers and heat pressure between the insulating polyester.When working, the electric heating film is the heating body, and the heat is sent into the space in the form of radiation, so that the human body and objects are warm first. Its comprehensive effect is better than the traditional convection heating method.
How about Korean electric film?
The electric heating film in Korea is very good, the electric film heating system is extremely safe, without any safety hazards, it is a very mature product.After testing by relevant departments, its insulation level, pressure resistance, leakage current, and flame retardant have met the corresponding standards of the state.Users can use it at ease.1. The breakdown voltage of the electric film is more than 1200V, so it will not be risk of penetrating under the voltage of 220V.2. The midline of the leakage current of the electric film is less than 0.126mA; the phase line is less than 0.136mA.3. The electric film has flame retardant and does not cause spontaneous combustion of the electric heating film.
Is there any radiation of Korean thermal membranes in Korean electric membranes?
Korean electric film radiation is not large. Generally, electrical appliances have radiation and do not endanger the health of the human body. The heating film heating method does not consume water, does not occupy land, autonomous switching, energy -saving materials, and is in line with the policy of reducing and low -carbon.At the orientation, the electric film cannot be used directly for ground radiation heating, and it requires the PVC vacuum seal set of patented patents to be used for ground heating to ensure the use effect and life.
Korean electric heating film installation
1. Temperature control and wiring box slot: (1) threading.According to the design requirements, draw the wire slot wire on the flat line and the wall; (2) according to the design icon position, the temperature controller groove, a wire groove and wire groove in the wall will be applied to the wall.Install the wiring box, the temperature controlled box and the wire catheter buried in the wall according to the slot position.2. Powder the moisture -proof layer: clean the debris on the surface of the ground or the floor.According to the design requirements, the ground floor and bathrooms such as the first floor and the bathroom are laid the moisture -proof layer with moisture -proof requirements.The practice of the moisture -proof layer is based on the design. The current approach of Xinyuyang is: choose 2 ~ 3mm thick reflective membrane asphalt waterproof coils, and the reflective membrane surface is placed on the top.Spray the asphalt base oil and require uniform spraying without leaking.3. Lay the insulation layer: (1) Clean the debris on the surface of the floor or the floor of the floor.(2) Pay the insulation board with a piece of the ground, and fill the ground. The corners should be installed along the outer wall.The insulation board should be cut neatly, and the gap must not be greater than 5mm. The wide tape adhesion is smooth and smooth.
Korean electric heating film price
The price of Korean thermal film is around 60-200 yuan.

Related tags： Houseware