The overall glass fiber reinforcement water tank is assembled from high -quality SMC water tank board.It is characterized by food -grade resin, so the water quality is good, clean and non -polluting; the product has high strength, light weight, corrosion resistance, beautiful appearance, long service life, and convenient maintenance management.
FRP water tank installation
Installation process: 1. Apply a layer of flat cement on the basis of the concrete that are done in advance. Pay attention to the flat surface of the cement and not raised.2. Welded the corresponding groove steel bracket according to the size of the FRP water tank. Note that all the welding brackets should keep the suture consistent when connected.3. According to the installation manual attached to the water tank of the glass fiber reinforcement tank, connect the floor of the glass fiber reinforcement water tank according to the steps, and connect to the two bottom plates.The water tank of the glass reinforcement is in place and no cracks will occur.4. Use a fixed corner iron to connect the reinforcement on the groove steel bracket of the glass fiber reinforcement water tank, so that the water tank of the FRP will not easily fall off and separate.
FRP water tank repair
Maintenance common sense, two major problems such as water leakage phenomenon or material quality problems.Regarding the problem of leakage, there are several maintenance methods: 1. For small places with details or frequent water, we can change the foot pads and screws, so that the problem can be solved after reinforcement.2. If it is a crack in the plate, the leakage is leaked. If the seam is small, we can use a sealing glue to repair it.It can also be repaired inside the water renovation when the water is not leaked. The method is to put the water inside, grill, seal glue, or sprinkle with water without leaking water.3. If it is leaking at the seam of the plate and the plate, it means that the middle rubber strip is not clamped or the bolts are not tightened. Just tighten the bolt. Pay attention to the tight end.4. If there are four corners and leakage, it means that the rubber strip is not put well, or the direction of the leakage is wrong.Essence5. If it is leaked by freezing and frozen in winter, it must be replaced again.Regarding the material problem, if the cracks of the plate are very large, that is, the material quality is not good, and you should contact the manufacturer in time.
FRP water tank manufacturer
Beijing Runfeng FRP Co., Ltd. is a company specializing in the production of FRP products. The main products include various glass reinforced fiber reinforcement fiber reinforced fiber reinforcements, ventilation pipes, glass reinforcement water tanks, glass fiber reinforcement box, etc.Low price and high quality.
FRP water tank price
There are many prices in the price, which must be dependent on specific needs.

Related tags： Houseware