Electric push cutting is a common hairdressing tool.In the barber shop, electric push cuts are mainly used to trim men and childrens hair. Womens use is relatively small. In daily life, we can also buy electric push shear and push their hair for our own family.convenient.Today, lets take a look at the types of electric push shear and how to maintain electricity shear.
Types of electric push cutting
1. Charging electric push shear
This kind of electric push cut is generally not carried, but it is very flexible, the power is relatively small, and the knife head is also small. It is very suitable for young women to use it by themselves, or young mothers use haircuts for their baby.Of course, the disadvantage of charging electric push shear is that the battery needs to be used, so the working hours are limited.
2. Plug -in electric push shear
This electric push shear is a line. Its power is very high, the knife head is strong, and there is no need to worry about the battery problem, so the experience experience is very good.Of course, plug -in electric push cuts also have a disadvantage, that is, its line length is generally only 2.0-2.5 meters. Due to the limitation of the line length, it is not convenient to operate.But even so, plug -in electric push shear is still the love of countless haircuts and hairdressers.
Precautions for electric push cutting
1. Before using the electric push, drop 1-2 drops of white oil to the blade.
2. If the electric push is very hot with hot hair, turn it off immediately, wait for the blade and the fuselage to cool down, check whether there is a problem with the electric push cut, and then use it.
3. The continuous use time of electric push should not be used for more than 10 minutes to prevent the machine from being damaged or burned, so pay attention to intermittent use.
4. If the electrical push cuts the sound of "da", remember to adjust the screw outward, if the intensity is insufficient, the inward is not tone.
5. If the head of the knife becomes blunt, replace the new knife head or electric scissors in time.
6. If you trim the long hair, it is best to cut the long hair with a manual scissors first, and then use the electric push to trim.
7. When the noise of the electric push is large or the blade is violently vibrated, a ingot -shaped screw next to the electric push can be loosened backwards, and the blade screw screw is too loose.But dont press too tightly.
8. Installation and disassembling electric push, be sure to disconnect the power switch, otherwise, it is easy to be cut.
How to maintain electric push scissors
1. When using electric push shear, it should be pushed into a small amount of scissors between the blade every few teeth.Note that due to the fast cutting speed of the blade, raw oil cannot be used, lubricating oil or mixed oil containing kerosene and other solvents, because these oils will volatilize or decompose a sticky impurities, affecting the blade movement.
2. How to appear striped hair and leaks during the haircut is caused by stickiness on the surface of the blade, so it is necessary to clean the blade immediately and cheer properly.
3. The time for each use should not be too long, and the amount of knife should not be too large when using it, so as not to burn the coil.When the temperature of the coil is too high, it should be stopped.
4. The blade and gaps of the upper and lower blades are easy to hide dandruff, dandruff, dust or other debris. After each use, use a small hair brush to clean.Due to the curing of hair debris and skin oil, it will hinder the movement of scissors and its sharpness, so it should often be brushed off the debris that remain on the blade.
5. Do not rinse with water or bring them into the bathroom when used. When not in the long run, it should be stored in a dry and ventilated environment to extend the service life.

Related tags： Houseware