The difference between non -standard doors and standard doors. Non -standard door customization is different from the size of ordinary standard doors. The door customized according to customer requirements is called non -standard door.What is the difference between non -standard doors and standard doors?How to customize the non -standard door?Lets take a look with Xiaobian below!
Non -standard door size measurement
1. Actually measure the width and height of the door hole.It is necessary to measure whether the upper, middle and lower parts of the door hole should be consistent.
2. Correct the wall hole for more than 20mm of errors. Correction can be corrected with cement mortar or lime.
3. The thickness measurement of the door wall should also measure the upper, middle and lower parts. See if the thickness of the wall is the same. At the same time, it depends on whether the thickness of the left and right walls and the top of the door.The maximum value, but the error must not exceed 5㎜.
4. If the thickness of the wall is more than 5㎜, a correction is needed.
5. If the wall is a diced wall, you need to make a fake wall with a width of 50-60mm with a fine woodworking board.The thickness of the wall is the same thickness.
6. The minimum thickness of the door wall is not less than 80㎜.The strength of the door frame with low and 80mm size is not very large, and the support for the door is not enough.If it is less than 80mm, the thickness of the wall needs to be thicker to more than 80mm.
7. When there is a protruding beam on the door hole, the top of the door is unable to install it.It also needs to be used as a 50-60mm height of fake walls with a fine-grained board.
8. The door hole has steps.The face set with a step -side side should be added with a step height, and the specific size is determined according to the height of the steps.
9. The thickness of the bathroom and kitchen doorway is particularly noticed that the thickness of the wall tiles on the wall.Generally, the single -sided tile is thicker and 25砖, and the two sides of the two sides are thick.The final size includes the thickness of the wall tiles.It is best to measure it after the wall brick is pasted.
10. Pay attention to the opening direction of the door during measurement. The direction of the opening is defined as: From the front of the door, the union is open to the left, and the pages are on the right.
11. The measurement of the mouth and the window cover is basically the same as the door hole measurement, but the size is recorded according to the actual measurement results, without deducting it.
The difference between non -standard doors and standard doors
The difference between non -standard doors and standard doors is the difference between size.
Non -standard doors are a collective name. It can be simply understood as a standard size door. There is no fixed size and style. Generally, it is customized according to the customers requirements.
Non -standard door customization
1. Fully understand the market and have a clear understanding of the product quality, services, strength, and styles of various non -standard door manufacturers.After determining the non -standard door manufacturer, sign an order and pay a certain deposit in advance.
2. When customization of non -standard doors, it is necessary to provide manufacturers with the size of each door hole, as well as the opening of the door body, and even the style of style. Basically, it is necessary to make according to the environment.
3. At present, the width of the non -standard door hole in the market is basically about 2100*2380, and the height of the door hole is about 2720*2900. In order to ensure the smooth, atmospheric, practical and basic proportions, and overall aesthetics of the door.Please pay attention to the above size when transforming the door hole.
4. It is not perfect after the door is delivered, so after -sales service is important. When signing the contract, it is best to clear the warranty time and the customer question response time limit.Rest assured.

Related tags： Houseware