The outdoor fire hydraulic is a water supply facility set on the water supply network outside the building. It is mainly for fire trucks to extinguish the fire from the municipal water pipeline or outdoor fire supply network.One of the important fire facilities.
Outdoor fire embolism model
1. SN fire hydrant nominal diameter (MM): DN50, DN65 nominal work pressure (MPA): 1.6 strength test pressure (MPA): 2.4 Applicable medium: clear water, foam mixed solution two, SNJ65 decompression fire hydrant nominal diameter(MM): DN65 Nominal Work pressure (MPA): 1.6 strength test pressure (MPA): 2.4 Applicable medium: clear water, foam mixed solution
Outdoor fire hydrant price
Fire hydrant above ground, with a specification of SS100/65-1.6, quotes about 300 yuan; underground fire hydrants, the price of SA100/65-1.6 products is about 400 yuan; telescopic water pipe fire hydrant with a specification size of 800*650*240mmThe product quotation is around 400 yuan.
Outdoor fire hydrant installation specification
Fire protection requirements for outdoor fire hydrants 1. The most basic requirement is that the outdoor fire hydrant should be installed in an obvious position, and it is convenient to get water. In this way, it will not delay time when emergency fire extinguishing.Install ground -type fire hydrant on the ground with warm climate, install underground fire hydrants on the cold climate, and underground fire hydrants also need to set a fixed sign on the ground.2. The outdoor fire hydraulic of the residential area or the municipal government should be installed along the road. When the road exceeds 60m, it should be set on both sides of the road and close to the crossroads.The setting of outdoor fire hydrants should not be greater than 120m, not to exceed 2m from the edge of the road, and the exterior wall of the building cannot be less than 5m. If it is a high -rise building, it cannot be greater than 40m from the exterior wall.

Related tags： Houseware