Basic materials are called plate furniture with furniture connected by artificial boards and hardware.Most of the childrens bedroom furniture sold on the market is now such furniture.Board furniture is novel and color ...
Five five tricks to buy board furniture
Basic materials are called plate furniture with furniture connected by artificial boards and hardware.Most of the childrens bedroom furniture sold on the market is now such furniture.Boarded furniture has become a new family in furniture categories with novel style, bright color, clear wood grain, non -deformed, non -cracked, anti -moth -proof, and moderate prices.
Pay attention to the following 5 points when buying board furniture:
1. Surface quality.Board furniture uses artificial boards such as particleboard, medium -density fiber plate, and covered with surface decorations with melamine, PVC, woody thin wood and paper wood grain.Effect and feel.When buying, it mainly depends on whether the surface of the board has defects such as scratches, indentation, bubbles, dehydrated peeling, and glue marks; whether the wood grain pattern is natural and smooth, do not feel artificially made;The consistency and harmoniousness of the color and lines make people feel that the symmetrical plate is from a piece of material.
2. Production quality.In the production, sheet furniture is composed of forming the molded plates through tug -of -saw, decorative edge, and component assembly. Its production quality mainly depends on tailoring quality, side, surface decoration quality and board port quality.The plates of board furniture have the quality requirements of the flatness, verticality, and angle of the components of the plates in the tailor. Generally speaking, the tailoring technology of the board is within 0.01 mm per meter,The back is flat and the angle is good. After the furniture is made, there will be no plate tilt.The accuracy of the sawing sheet in the tailoring will also affect the end surface and side quality of the plate. Tailoring defects such as scratches, collapse, and corners will also affect the appearance quality of layout furniture.The side and facial decoration mainly depends on whether the glue is evenly applied on the decorative parts, whether the bonding is firm, whether the edge is smooth and smooth, the parts of the parts, the door panel, the drawer panel, etc.There is no trace of adhesion on the edge of the plate.
The assembly combination mainly depends on whether the mouth of the drill is exquisite and neat. Whether the connector is firm after installation. There is no gap in the T -shaped seam after connecting the plane and the end surface.Whether the seams of the doors and drawers are too large. Generally, the opening of the door and the drawer is generally required to be flexible and free to the opening of the door and the drawer.
Third, the quality of metal and plastic parts.Board furniture uses metal and plastic parts as a fastener connector, so the quality of the metal parts also determines the quality of the internal quality of board furniture.Metal parts require dexterity, smooth, surface -plated on the surface, and must not have rust, burrs, etc., and the accuracy of the conjunction is higher.The plastic parts must be beautiful and colorful. The strength and elasticity in the use of the use should not be too thin.The open -type connector requires flexible rotation, and the springs inside should be tight and appropriate.China
Fourth, the main size.The plate furniture is mainly on the market.There are also multi -functional film and television electrical cabinets and other products.The main size (ie, functional size) of its furniture has the requirements for national standards.For example, the depth of the space in the wardrobe stipulates that the space depth in the wardrobe should be greater than that of 530mm, and the hanging stick of the hanging coat on the upper edge of the surface to the bottom plate is greater than or equal to 1400mm.The middle air height along the ground height should be greater than or equal to 520mm.When buying above, pay attention, because if furniture is smaller than the specified size, it will bring a lot of inconvenience during use.For example, after the depth of the large wardrobe is too small, the door will not be closed after the clothes are closed.
Fifth, the amount of formaldehyde release.Board furniture is generally based on the particleboard and medium -density fiber plate as the substrate.The national standards of formaldehyde release in its plates have regulations.Among them, the particleboard stipulates that the amount of formaldehyde release is small than equal to 50 mg, and the formaldehyde release of the medium -density fiber plate.When consumers buy, open the door and drawer. If you smell a stimulating odor, cause tears or cough, it means that the amount of formaldehyde release in the furniture exceeds the standard regulations, and such furniture should not be purchased.Otherwise, once it is used, especially when using the air conditioner, the air environment of the room will contain formaldehyde, which will affect your health.
8 Precautions for the use of new furniture
In addition to all solid wood furniture on the market, most of them have artificial board components.After the furniture is bought, you can turn on the air conditioner in the room where the furniture is placed for inspection. If it feels that the irritating smell is severe, and it makes people sneeze and tears, there are two possibilities: one is the high formaldehyde release; the other is the furniture paintThe content of volatile substances is relatively high.At this time, it is recommended not to use the room for the time being. You should open the indoor doors and windows as much as possible to keep the air circulation.After a period of time, if the smell is still very powerful, it may be that the amount of formaldehyde release in the furniture exceeds the standard.Because the VOC in the paint can generally be volatile after 2 to 3 months, it does not smell the smell, and the distribution time of formaldehyde release is relatively long, less for several months, and more for several years.Consumers can go to the relevant quality inspection agencies to entrust the amount of formaldehyde release in furniture. If it does exceed the standard, it can be required to return the goods by the quality inspection report.

Related tags： Houseware