Among the necessary haircuts and hairdressing tools for the family, although the electric push shears do not want to scissors and combs, they are commonly used, but there is no such thing as it does not work at the critical time.A great benefit of electric push cutting is to help MMs repair the scattered hair of the horns, hind necks and backs of the ear.Therefore, such a practical hairdressing tool must be maintained.If the maintenance method is not right, the electric push cut is easy to become blunt, the hair and even the short circuit, what is the correct maintenance method?Can the electric push cuts used by MMs can give the baby hair hair?You can find the answer on the encyclopedia on all kinds of interesting and practical tips for pushing.
The difference between push cutting and childrens electric push shear
In terms of electricity, electric push cutting can be divided into charging and plug -in type; from the applicable object, electric push shear can be divided into push shear and childrens electric push.After MM understands the difference between the former, isnt it clear about the difference between the latter?Often, some young mothers are cutting the babys electric push on their heads without clearing the difference between pushing and pushing childrens electrical push.
In fact, push cutting is very different from childrens electric push cutting.First of all, childrens electric push cuts are designed for baby and children. Because their hair is relatively soft, the knife head is not particularly sharp, and the tremor strength is also small. Such electric push shears are generally mute.If the childs electric push is cut on the adults head, the knife head is likely to be damaged because the hair is too hard.SO, the MMs with little babies at home can have a long time to remember. The electrical push cuts used by adults and children should be clearly distinguished. Do not use it mixed.
Bachelor generation push belt line is better or not with the line
Electric push cutting is especially suitable for short hair MM when trimming. For example, MM with a cute BOBO head often needs to use electric push scissors.At this time, electric push cutting is not only a hairdressing tool, but also a hairdressing tool. So is it better to use electric push cutting in this occasion?MMs may wish to listen to what Momnet encyclopedia says.
The electric push -pushing tape does not have a line, it depends on the personal usage habits of MMs.Generally speaking, the electrical push shearing of the line refers to the plug -in electric push shear. This kind of electric push shear power is high, the knife head is strong, and it is good to eat.Mi, so it is not particularly flexible to use, but it is OK at home.
The electric push -cutting of the line refers to the charging electric push shear. This kind of electric push cutting operation is convenient and flexible. Only the battery has sufficient battery and can be used.However, its power is relatively small, and the strength of the knife head is not strong, but it is still used as a young MM as a common hairdressing tool in the bag.
How to add lubricating oil for electric push scissors
Lubricating oil can make the electric push shear more smoothly, and the phenomenon of the upper and lower blade of the blade is not greatly reduced.Therefore, if MM wants to make their own electric push and shear life longer, every three or five days must cut the electric push for the last lubricant.
When pushing the oil, remember not to get in the wrong position. Generally, lubricating oil is on both ends and central parts of the upper and lower blade binds!Many MMs were wrong due to the wrong position on the oil, which caused the electric push to fail. As a result, it was mistaken for the electric push to cut it. If you take it to the maintenance store, it takes a money again.
The lubricating oil of the electric push is also very particular. For example, the oil cannot be used, because it is aimed at high -power machines, and the lubricant suitable for electric push cuts is generally sewing machine oil and white mineral oil.
How to clean up the electric push
Doing a good job is an important step in the maintenance of electric push cutting, but if the electrical push cut is dipped in water, not only the knife head is easy to rust, but it is also easy to leak electricity when it is used for wet electric push!So how should MM clean the broken hair in the blade?Let the encyclopedia tell you!
In fact, two types of electric scissors can be washed and not washed.Although the electric push -cutting of water was cleaned with confidence, just dry it; if it is not washed, use the equipped small brush to carefully brush the knife head with the hair. After finishing this step, give a little bit of the knife head.Push the oil to make it smoother when it is used next time.
Another method of cleaning the non -washed electric push is to cut the electric push and turn on the head, remove the knife head, clean it in kerosene for a while, and then hang the knife head to dry it.
How to maintain electricity cutting
Electric push scissors are automatic pusher that run by electricity. SO, MMs should pay more attention to electricity.Although the electric push shear is small, there are many complex components inside. The maintenance of these components often requires MMs to spend more attention.MMs may use the following correct maintenance methods.
1. KO trembling.When your electrical push -cutting noise is large or the blade trembling is severe, you may wish to loosen the ingot screws back, so that the adjustment can help the electric push shear to return to normal.
2. KO is insufficient power.The method of judging the insufficient push -pushing power is to see if it forms three white roads after the hair is turned on. If the power is insufficient, the ingot -shaped screw can be tightened.
3. Frequent oil.The blade of the electric push scissors needs to be maintained often oil, otherwise the upper and lower blade will be hot or the electric push is not enough.
4. Avoid electric shock.220V plug -in electric push cuts. If the three -core wires are used, the ground terminal of the ground wire and the three -eye socket must be correctly connected, otherwise the electric shock is very dangerous!
5. Keep dry and ventilation.The electric push should be placed in the dry and ventilated environment, so that it can extend its life span, so MMs try not to bring it into the bathroom to use it, or wash the knife head with water.

Related tags： Houseware