If there is no enough space in your room to accommodate a full -size closet, a wall cabinet may be enough.These wall cabinets also have many styles to choose from -most of them are traditional types of pine and picked flowers. Their appearance looks like an ordinary wardrobe with a drawer.Arrangement of drawers.So how to buy the wall cabinet?What techniques are there in installation
Wall cabinet purchase guide
1. Whether the selection of materials is environmentally friendly and directly related to the health of family members, so the cabinet board must have a national test report, which meets the national compulsory GB18584-2001 standard.
Second, whether the plate is strong determined the service life of the cabinet. The thickness standard of the thickness should be 18mm, solid and durable, and the service life should be more than 15 years;
Third, whether the craftsmanship is fine, first look at the edge of the model.The edge of the machine is generally uniform, and the black lines and sawtooth prints cannot be seen.Secondly, whether the backplane is mound installed to ensure stability;
Fourth, the accessories are critical. You must watch more when you buy. If the track must be high, wear -resistant; the pulley should be high, wear -resistant, and low noise;The edge is firm and the surface is flat.
Wall cabinet installation skills
Survey of the wall cabinet
The cabinet of the wall cabinet can be a wall or a sandwich, which can ensure the effective use of space and not deform.However, it is necessary to achieve the horizontal level and the vertical on both sides. If there is an error, the height difference between the left and right sides of the left and right sides is required. The bottom wheel of the wall cabinet door can make up for the error by debugging the system.
Installation of the frame
Home wall cabinets generally have drawer design. In order not to affect use, pay attention when designing the position of the drawer: you should avoid two intersections when making three sliding doors;On the side of the body; when the folding door is made, the drawer should have a 17cm gap between the side wall.
Installation of track
When making the cabinet, the size of the rail must be reserved.
Installation of the wall cabinet door
First fix the top rail, the surface of the track and the cabinet is on the same plane, and the upper and lower rails are placed in the reserved position; then the two doors are put into the track, measured the verticality of the door with a horizontal or straight ruler, and the upper and lower rails are adjusted to adjust the upper and lower rails.The position is fixed; check whether the door body is parallel to both sides, you can adjust the door body by adjusting the bottom wheel to achieve the level of the border and both sides; finally, the anti -jump device is fixed and the quality protection book is presented.

Related tags： Houseware