Multi -functional key blade steel is best for high -carbon stainless steel. Although high -carbon steel is the best in terms of hardness and toughness, considering the maintenance problem of the knife, high -carbon stainless steel is undoubtedly elected.The product is good or not, first depends on what material it is made.From the beginning, it was produced with the best materials. In practical applications, it brought the most exciting performance and the highest level of success to the product.Therefore, most of the high -quality knives in the world today choose high -carbon stainless steel.Let me give you a little knowledge about the key knife!
How to use the key knife
When the multi -functional outdoor knife is closed, some friends often use the back of the blade of a multi -functional outdoor knife with a body or hard thing (such as a table, etc.) to close the knife. This is more dangerous.At this time, someone touched you, and your knife may be hurting the body. Secondly, one -third of the first third of the blade is particularly bad (a few 111mm knives exceptions), so that the knife will make the knife make the knife make the knife.As long as a few times smashed on the knife body, the blade will be rolled with the blade to correct the cause, or the design problem of multifunctional outdoor knife, which may also have a certain relationship with the processing accuracy.
Therefore, please develop a good knife habit: hold the handle with one hand from the bottom, and the other thumb is poured into the last month groove of the last month of the main knife surface, and slowly close the knife.The 111mm multifunctional outdoor knife can basically be locked. There are two types of locking methods. One is a card lock. There is a square unlock switch on the back of the handle.After the unlocking switch is pulled down, you can close the main knife, and the number of multi -function outdoor knives starting with 0.83 and 0.84 uses a steel sheet lock (commonly known as: line lock).When unlocking, push the steel sheet behind the roots of the main knife, and you can turn it off with another hand.When turning off the knife, you must be moderate, dont hurt yourself or others.
Key knife precautions
Relatively speaking, the plastic shell of the light (transparent and imperfect) is the most "tender". With a nails, or if you rub it with your fingers, it will cause permanent and irreversible scratches.Come, most of them are installed with the instructions in the carton. The carton will inevitably enter some small dust during the transportation process.Most multi -functional outdoor knives are not scratched by obvious. It is invisible without looking at it, and after using the multi -function outdoor knife for one day, it will cause the handle with the hand, desktop, clothes, and even leather cases.The degree of scratching, if you dont want to scratch the housing, there is only one way: the multi -functional outdoor knife is not used.But this is unrealistic, so everyone is careful about the scratching of the shell.
The most afraid of the shell is to fall. From more than one meter high, it falls freely to the cement or marble ground. If it is the first or the plastic shell at the tail of the knife, it is likely to break, or even break it.For cases, some friends may ask, how can the multi -functional outdoor knife be so expensive? In fact, when it comes to the head, multi -functional outdoor knife is still civilian products. The shell is ordinary plastic.The shell is a little stronger than the light surface, but it is also afraid of falling. It will be bad when it falls from the high place.Some people are too concerned about the shell of the multifunctional outdoor knife, and even think that the shell has scratches and multi -functional outdoor knives. Here I want to ask. You buy a multifunctional outdoor knife.What about the problem to solve the problem? Or use a multi -functional outdoor knife handle to solve the problem? The multi -functional outdoor knife of the metal shell may not be broken after falling off, but the metal shell is also easy to deform, so everyone is inTry to use multi -functional outdoor knife, do not drop it on the hard ground.In addition, the shell is also afraid of high temperature, low temperature, strong acid and so on.
Key knife craft
1. A key knife contains dozens of parts. Each part has a separate production streamline. Below is a blade production line.Workers with special gloves checked the blades that have just been forged one by one, and then put them on the assembly line.
2. After inspection, the blade of no problem needs to be processed by a series of processing to improve the toughness and hardness, and at the same time, rust -proof treatment is performed.
3. After the final processed blade has been shining, but it still needs to pass the last test. Any defective residual product will be eliminated.It is precisely because of the test of the level that the quality of each Swiss multifunctional knife can be guaranteed.
4. After each separate blade passes the final test, it will be concentrated and sent to the assembly workshop.There is another finished product, which is so many scattered parts, and finally combine into a key knife with powerful functions.
5. The tested red shell is printed on it with logo.
6. Most of the key knives we see on the market are white aluminum shells.
7. After all parts are tested, they will eventually be sent to the assembly workshop, where dozens of decentralized parts here will be cleverly compressed into a small space.Under the surroundings of various parts, the assembly staff only has a large palm of the hand to work. It is here that through their dexterous hands, the key knife will be produced magical.
8. The assembly staff is installing the tweezers into a multifunctional knife.
9. Each multifunctional knife completed by assembly needs to pass a test level to ensure that no parts are missing, and ensure that each part is installed correctly and stable.Finally, wipe the multifunctional knife.

Related tags： Houseware