The ceiling lamp is a kind of lamps installed inside the room. Because the upper part of the lamp is relatively flat, it is close to the roof installation.The light sources include ordinary white bulbs, fluorescent lamps, high -strength gas discharge lamps, halogen lamps, etc.
How to choose the living room to suck the ceiling lamp
1. The size of the size of the ceiling light is mainly affected by the area of ??the living room. Generally speaking, the room area of ??the 29 -diameter living room ceiling light is between 15-25 square meters, which is in line with the current living room area of ??many families.The area diameter of 33 large -sized living room ceiling lights seems to be too big in the living room with an area of ??less than 25 square meters.It looks very uncoordinated.
Size of top lights
1. The size of the bedroom ceiling lamp Select the size of the bedroom and the size of the light and the size of the light source. Therefore, if you choose the bedroom ceiling light, you must first know the size and height of the bedroom.Generally speaking, the bedroom size is less than 10 square meters. Choose ceiling lamps with diameter below 45cm. The size of the top lighting source with diameter below 45cm is about 100W; 10-20 square meters of bedrooms choose to suck the ceiling lamp with a diameter of about 60cm.At about 200W; the diameter of the bedroom size is 20-30 square meters.The ceiling lamp.
How to remove the top light
When removing the circular ceiling light, first look at which type of ceiling lamp installed in the home. The new ceiling lamp has three small buttons next to the lamp seat. Open the small buttons and fall off.There are three screws next to the lamp. The screws need to be spinned before the lampshade can be removed.One of the bases of the top lamp is fixed on the roof with screws. This is relatively simple when disassembling. Take the screws directly to remove the ceiling light.There is a square ceiling lamp with an embedded ceiling light. This kind of ceiling light is generally fixed directly to the ceiling or the outside of the ceiling when it is decorated indoors.Some.There are two springs behind this light fixed. When disassembling, you need to seize the two borders with your hands, slowly pull down the top, and should also drag the ceiling light.
Embedded ceiling lamp installation method
(1) Open one -square hole in the ceiling installation. The place where the embedded ceiling lamp will be installed, which is convenient for the installation of the ceiling.Determine the position of the ceiling light, the size of the hole in the hole is corresponding.(2) During the installation, first install the installation card in the lamps on both sides to put the lamps on both sides of the lamp and install the lamps in the square or round hole.
How to install LED ceiling lights
1. When installing ceiling lights in the masonry structure, embedded bolts should be used, or fixed with expansion bolts, nylon plugs or plastic plugs; wood wedges should not be used.And the bearing capacity of the above fixed parts should be matched with the weight of the ceiling light.To ensure that the ceiling light is fixed and reliable, it can extend its life.2. When the expansion bolts are fixed, the bolt specifications should be selected according to the technical requirements of the product. The diameter and burial depth of the drilling hole should be consistent with the specifications of the bolt.3. The number of fixed lamp bolts should not be less than the number of fixed holes on the lighting base, and the diameter of the bolt should be matched with the aperture; the lights on the base are not fixed with the lamps (punching it by yourself during installation). Each lamp is used for fixed fixed fixed.The bolts or screws should not be less than 2, and the center of gravity of the lamp should be consistent with the center of gravity of the bolt or screw; only when the diameter of the insulation platform is 75mm and below, it can be fixed with 1 bolt or screw.
How to install the top lamp
How to install the ceiling lamp in the living room? 1. The two line heads connected to the power supply of the living room, the electrical contact should be good, and it must be wrapped in vinyl and maintains a certain distance.Under the same metal piece, it is necessary to avoid short circuit and danger.2. A room with a high floor or a shock of the ceiling on the ceiling is suitable for installation of the ceiling light.When installing the ceiling lamp in the masonry structure, a embedded bolt should be used, or the expansion bolts, nylon plugs or plastic plugs should be used; wood wedges should not be used.And the bearing capacity of the above fixed parts should be matched with the weight of the ceiling light.To ensure that the ceiling light is fixed and reliable, it can extend its life.
Putting on top lamp
For different types of ceiling lamps, we can say that it is full.There are many factors that affect its price for ceiling lights.For a few examples, the light requirements of our ceiling lights are relatively strong, and some are relatively strong in style.This depends on the specific choice of customers, because the requirements for ceiling lamps installed in different places are also very different.Products with special requirements are naturally different.The price of ceiling lamps we use is generally around 100 yuan.The high will be about hundreds of yuan, and the low is tens of yuan.
Top Ten Brands of Top Lights
Top ten brands of top lamps: 1. Opple2, Panasonic Panasonic3, Philips Zhaoxing 4, Tinseng Lighting 5, Langneng Lonon6, Huayi HY7, Sanxiong? Aurora 8, Crocodile Lighting 9, Sunshine Lighting 10, Foshan Lighting

Related tags： Houseware