The LED fluorescent tube uses LED white light as a light emitting source. The shell is the light diffusion cover/aluminum alloy. The power supply is divided into two types: built -in power supply and external power supply.At present, the external power supply has basically been eliminated, and most of the built -in power supply is adopted.
LED fluorescent lamp pipe connection method
The LED light is 220W directly to the driver, so there are only 2 lines, one phase line and zero line. Generally speaking, one is the line of fire and the other end is the zero line.In the case of a special LED fluorescent tube, then I had to use both one and two feet to use it, so that the two feet are one foot and one foot, and the other feet are zero, then the phase line is directly connected to the zero line. This is formed.It is a very dangerous short circuit.
LED fluorescent lamp tube manual
I. LED solar lamp tube is used in household lighting and commercial lighting; it is a green environmental protection and energy -saving product called by the world.LED fluorescent lamp tube has low power consumption, long service life, high efficiency, high brightness, low calories, solid durability, etc.During the installation, remove the original fluorescent lamp to the LED fluorescent lamp and remove the ballast and the ripplane.The power saving is about 80 ，, and the life span is more than 10 times that of ordinary lamps.If you take the factory for 24 hours as an example, you can recover the cost for more than half a year.Applicable indoor lighting in factories, office buildings, shopping malls, restaurants, schools, families, etc.2. Features: 1. Optoelectronics conversion constant current driving system with high efficiency, high power factor.2. Improve the transparent PC tube shell anti -UV.(Can maintain the transparent PC tube shell to illuminate the high bright white light) 3. The light decay of light, low noise, and no murmur.4. LeD fluorescent lamp tube light effect is as high as 80 lumens per tile.5. LeD fluorescent lamp tube wide voltage power supply has no frequent flashes.
LED solar tube specifications
The model model of the LED fluorescent lamp tube includes: T4, T5, T8, T9, T10, etc., indicating the thickness of the tube.Simple: The value behind T means the length of the lamp tube. For example, the perimeter of T4 is 4 cm and the T5 is 5 cm.Calculated in diameter: The diameter of the T8 is 1 inch (2.54 cm), and the diameter of the T4 is 0.5 inches (1.27 cm).T represents the diameter of the lamp 1t = 1/8 ″ 1 ″ = 25.4mm1t = 3.175mmt4 = 12.7mmt5 = 16mmt8 = 25.4mmt9 = 28.6mmt10 = 31.8mm Note: The lamp heads of the light lamp are mainly used by G5 and G13 companies.A group of lamps are usually T5 lamps. The fluorescent lamp specifications commonly used in a long time are T10 and T12."T" represents "Tube", indicating the tube, and the numbers behind T indicate the diameter of the lamp.T8 has 8 "T", one "T" is 1/8 inches.One inch is equal to 25.4 mm.Then each "T" is 25.4 ÷ 8 = 3.175mmt12 lamps. The diameter specification book is (12/8) × 25.4 = 38.1mmt10 lamps.The diameter specification book is (8/8) × 25.4 = 25.4mm.
LED fluorescent lamp brand
The top ten brands of LED fluorescent lamp pipes are: Philips, OPPLE, Type Lighting (NVC), Siege, Europe and the United States, Foshan Lighting, Opple, Mu Linsen Lighting, FSL, Frestec.
LED fluorescent lamp price
T8LED fluorescent lamp/solar tube, 240 degrees 10 yuan LED fluorescent lamp 18W solar light 82 yuan LED fluorescent light indoor lighting LED daylight 68 yuan LED sunlight integrated T5LED daylight tube of 35 yuan for reference only, the specific price is subject to the real price.

Related tags： Houseware