Gas boilers include gas boilers, gas heat water boilers, gas steam boilers, etc. Among them, gas heat water boilers are also called gas heating boilers and gas bath boilers. The gas boiler, as the name implies, refersElectric boilers are the most economical, so most people choose gas boilers as steam, heating, and bathing boiler equipment.
What are the characteristics of gas boilers
1. Display water temperature in large fonts, which is convenient for the operating conditions of boilers and systems. The water temperature can be set at will from 10 ° C to 90 ° C. The boiler is fully automatically heating to the system or providing users with hot water for users.
2. The control system controls the start and stop of the circulating pump according to the temperature of the furnace water temperature. The furnace water reaches the setting of the upper limit water temperature hot water circulating pump to start, and it is lower than the setting of the lower limit water temperature hot water circulating pump to stop.
3. The horizontal gas bath boiler is a three -back full -wet back structure. It is designed with large furnaces and coarse tobacco pipes to increase the heat absorption of furnace radiation and effectively energy conservation and consumption reduction.The use of threaded tobacco pipes and waveform stove bile greatly enhanced the heat transfer effect, and greatly saved fuel consumption.
4. The whole machine is also equipped with overheating protection at the same time (when the water temperature in the furnace is high, the burner automatically stops working and the bee will alarm, and the secondary overheating protection (when the temperature of the boiler shell exceeds 105 ° C, automatically cut off the second circuit)Water protection (when the furnace water is lower than the extremely low water level, the boiler stops and issues a bee -shaping alarm), and the boiler leakage protection protection (the power leakage and short circuit of the control system will be automatically cut off after the electrical leakage and short circuit).
5. The boiler is designed according to the normal pressure structure. The boiler is in a stateless state without safety and danger.Adopt high -grade centrifugal glass wool multi -layer insulation, famous white color steel plates for external packaging, less heat loss and beautiful rust resistance.
How to maintain gas boilers
1. Pay attention to the following points during the operation of the gas boiler: (1) The gas boiler does not allow positive pressure to burn or furnace smoke spray, because it is easy to burn and add coal holes;Anti -wet corrosion.
2. The gas boiler runs every 2-3 weeks and should be checked once.
3. After the gas boiler is running every 3-6 months, the oven should be stopped for comprehensive inspection and maintenance: (1) Check the inside and outside of the gas boiler.Severe defects should be repaired in time. If the defects are not serious, they will be repaired next time when the oven is suspended. If there is suspiciousness, it does not affect safety production, so it should be recorded for reference in the future; (2) After the inspection is completedPaint the bottom paint on the water surface to prevent corrosion.
4. The gas boiler and boiler base is painted at least once a year.
5. Maintenance methods that are not used in gas boilers in the regular period: There are two types of dry and wet method. The stoves are stopped for more than a month. The maintenance method should be adopted. The wet maintenance method can be used for less than one month.
(1) Dry maintenance method: Put the stove water after the boiler is stopped, completely remove the internal dirt, rinse it, dry it in the furnace (be careful not to fire), and then block the diameter of 10-30 mm in size.The raw lime is installed and placed in the pot tube. It does not make lime contact with metal contact. The weight of lime is 8 kg per cubic meter of the pot.Once a month, if the ingredients are broken, it needs to be replaced immediately. When the boiler reaches, the lime should be taken out.
(2) Wet maintenance method: After the boiler is stopped, put water to the boiler, completely remove the internal dirt, rinse it, and re -inject the processed water to the full full full.Then turn off all valves. The cold climate should not be used to prevent the stove to avoid freezing and damage the boiler.

Related tags： Houseware