The enamel pot refers to the pot made of enamel glaze on the surface of the metal blank.With metal mechanical strength and porcelain glaze materialization characteristics.The enamel pot is sought after because of its aesthetic, lightweight and heat resistance.The enamel pot is generally white. The glazed solvents used in white enamel are silicon oxide, alumina, manganese oxide, potassium oxide and sodium oxide, so there is no risk of aluminum poisoning.
Can the enamel pot use an induction cooker?
1. Do not burn and change the cold and cold drama.Before use, put oil or water in the pot before heating.According to the prescribed thermal stability standards, the pot can adapt to the temperature difference between 320 degrees Celsius to fall to 20 degrees Celsius. It exceeds this range and is easy to burst into porcelain.Burning air first, then pour water or oil, the temperature difference changes greatly, and it is easy to burst.
2. When steaming with porcelain bowls, use contempting pads, otherwise the water in the bottom of the bowl will be dried first, causing porcelain.If you use a flat enamel bowl steamer, there will be no porcelain.
3. When burning the pot and white fungus, prevent the bottom of the bottom of the pot.If there is a coke, soak the water for several hours, remove the accumulation with bamboo slices. Do not use a hard sharp weapon to remove the coke and damage the porcelain surface.
4. After using it for a long time, dirt appears in the pot. It can be scrubbed with alkaline water, soap powder, or boiled with water and mortar acetic acid.
Is the enamel pot, okay
1. Enamel pot can be used on the induction cooker.However, it should be noted that there is no pattern pattern in the pot. The bottom of the pot should be flat, and there must be water inside.The enamel pot itself is the sandwich of porcelain and iron, which can be used with confidence.
2. The induction cooker generates a variable magnetic field through the electronic circuit board. When the furnace surface is placed at the bottom of the iron -containing pot, the pot, that is, the cutting magnetic force line of the pot and the current of the metal part of the pot.The vortex causes the pot and iron molecules to move at a high speed. The molecules collide with each other and friction.
Is the enamel pot poisonous?
1. Material composition
The enamel pot refers to a composite material made by the surface of the metal blasting on the surface of the metal blank, and enamel is a composite material that is condensed on the matrix metal and firmly combined with the metal by melting the inorganic glass material.The enamel is mainly composed of two parts, namely metal materials and porcelain glaze.
2. Metal material
Metal materials for enamel are generally steel, aluminum, copper and stainless steel.Steel mainly uses low -carbon steel plates. It is the main material of the inner material of the volume water heater.The iron is mainly used as an iron carbon alloy with a carbon content of more than 2.11%. These are materials that produce cooking utensils.Aluminum is mainly pure aluminum and aluminum -magnesium alloy, and copper materials mainly include copper and brass.
3. Features
The enamel pot has good mechanical strength and porcelain glaze materialization characteristics. It is good in corrosion, abrasion resistance, and heat resistance, and it also has the characteristics of non -toxic and decorative characteristics.It is favored by consumers because of its beauty and lightness.

Related tags： Houseware