The socket, also known as the power socket, switch socket.The socket refers to a seat that can be inserted in one or more circuit wiring, which can be inserted into various wiring through it.This is convenient to connect with other circuits.Through the connection and disconnection between the line and the copper parts, the connection and disconnection of the circuit will be reached in the end.
Socket link method
1. Find the line with a test pen first;
2. Turn off the socket power;
3. Remove the line of the fire line to one of the A tags in the two holes, and then connect a 2.5mm2 insulating line from the other hole to connect to the Lake in the three holes below.
4. Find out the n -hole in the 3 holes of the 3 holes of the socket directly;
5. Find out the ground wire directly into the e -hole in the three holes of the socket.
Note: Zero and ground wire cannot be mistaken (generally facing the left and right fire on the left and right fires of the socket), otherwise the electric equipment will be inserted and the card will be tripled as soon as it is opened.
Precautions for using socket selection
1. Power sockets should adopt products that are qualified by the national product quality supervision department.
2. The power socket in the residential residence should be a safe socket, and the wet places such as bathroom should be used.
3. The rated current of the power socket should be more than 1.25 times that of the rated current of the known equipment.Generally single -phase power socket rated current is 10A, special power socket is 16A, special high -power household appliances should be selected according to the actual capacity;
4. In order to be convenient, the number of combination sockets is best, and the maximum (including switches) does not exceed three;
5. For household appliances that are dangerous to insert a power shock, the socket should be used to disconnect the power supply.
6. In a more humid place, installing the socket should be installed at the same time.

Related tags： Houseware