With the prevalence of personalized customization home, more and more people hope that their own personality is displayed. In addition to customized furniture, even the size of the door can be customized.
Non -standard door purchase
1. Gate lock quality
The quality of the lock determines the service life and safety of the door products. When choosing, be sure to pay attention to the lock. It is best to choose a anti -drill lock, and the lock requires a three -position lock structure.The security of non -standard doors is higher.
2. Locking the heart board
Non -standard doors are divided into two types: closed -type and fence type from structural design. No matter which one is selected, locks are the main parts of theft and destruction.Not less than 500 mm.
3. Process quality
When choosing, you must pay attention to the observation of its production technology to see if there is welding defects, such as opening welding, unparalleled welding, leakage welding, residue, etc.Whether the door fan opens flexible and so on.
4, appearance design
The appearance of the non -standard door is diverse. It is recommended not to follow the trend of what kind of appearance to choose. Try to choose the door products that are suitable for your home decoration and use. You must know that the non -standard door itself has no standard.its the best.
5. Factory strength
The powerful manufacturers production technology and production technology are very standard. Naturally, the quality of the door products produced by its production also passes through. When purchasing, the manufacturer must provide a qualified certificate.Rights and interests.
Non -standard door installation
Before installation: Check the door frame and the facade in front of the door, whether there is any damage, and whether the accessories are complete; check that the lace is straight. If you need to be adjusted, you can install it;Within millimeters; check whether the door hole must be consistent with the size of the upper, middle and lower, whether the upper and lower, left, and right are parallel to the ground.
Non -standard door installation:
1. Put the door frame into the door hole. It must be parallel to the left and right vertical. For example, if the door hole is more than one centimeter than the door frame, the position of the expansion screw in the door frame must be used to use a stone or wood.Do not tighten a expansion screw.The door of the Roman column should first install the Roman column to the door frame into the door.
2. Hang up the facade, check whether the gap between the facade and the door frame is parallel and whether the size is standard, and whether to form a straight line on the two facades on the door.
3. After adjusting, take off the facade and beat the other screws. When the screw is tightened, it should be tightened on the left and right several times.The tight screw is based on not pulling the door frame.
4. Hang the facade back, check the gaps and opening and closing, and try to adjust the loosening of the expansion screws to adjust the gap and opening and closing of the door.
5. After fixing, install the handle and fix it on the facade. Do not turn too tightly.
6. After the installation is completed, it must be adjusted in the door frame or poured into the cement before the door adjustment must be completed before this step can be performed. During the operation, it is not too large to cause too much pressure on the door frame to cause the door frame to deform.
Non -standard door size measurement
1. Actually measure the width and height of the door hole.It is necessary to measure whether the upper, middle and lower parts of the door hole should be consistent.
2. Correct the wall hole for more than 20mm of errors. Correction can be corrected with cement mortar or lime.
3. The thickness measurement of the door wall should also measure the upper, middle and lower parts. See if the thickness of the wall is the same. At the same time, it depends on whether the thickness of the left and right walls and the top of the door.The maximum value, but the error must not exceed 5㎜.
4. If the thickness of the wall is more than 5㎜, a correction is needed.
5. If the wall is a diced wall, you need to make a fake wall with a width of 50-60mm with a fine woodworking board.The thickness of the wall is the same thickness.
6. The minimum thickness of the door wall is not less than 80㎜.The strength of the door frame with low and 80mm size is not very large, and the support for the door is not enough.If it is less than 80mm, the thickness of the wall needs to be thicker to more than 80mm.
7. When there is a protruding beam on the door hole, the top of the door is unable to install it.It also needs to be used as a 50-60mm height of fake walls with a fine-grained board.
8. The door hole has steps.The face set with a step -side side should be added with a step height, and the specific size is determined according to the height of the steps.
9. The thickness of the bathroom and kitchen doorway is particularly noticed that the thickness of the wall tiles on the wall.Generally, the single -sided tile is thicker and 25砖, and the two sides of the two sides are thick.The final size includes the thickness of the wall tiles.It is best to measure it after the wall brick is pasted.
10. Pay attention to the opening direction of the door during measurement. The direction of the opening is defined as: From the front of the door, the union is open to the left, and the pages are on the right.
11. The measurement of the mouth and the window cover is basically the same as the door hole measurement, but the size is recorded according to the actual measurement results, without deducting it.

Related tags： Houseware