The overall wardrobe has become an indispensable part of modern home decoration.Because of the orderly customization of the overall wardrobe, and the characteristics of environmental protection, fashion, and professionalism, will be destined to become the consumption hotspot of home wardrobe in the next few years.Today, I will introduce some of the common sizes and raw material compositions as a whole.
The size standard of the overall wardrobe
1. How to determine the size of the wardrobe
Assuming that there is a traditional wall closet with a height of 2440mm, then the specific size is as follows:
The lower cabinet is 1830mm, and the rest is returned to the upper cabinet. The cabinet surface is 200mm high, and the clothes are enough.A unit width is 900mm, and each door is roughly 450mm.As for the depth, some workers divided a 1220mm x 2440mm splint into two and turned to 600mm deep.Small and medium -sized units must fight in the sizes. It should be a splint first paved 100mm first, and then divided into 2.The cabinet depth is 560mm, with a total of 580mm in the even door, and the narrowest doors should not be less than 530mm, otherwise the sleeves will be clipped.If it is limited by the room area and can only be provided with a narrower wardrobe, a kind of farm can be pulled out, and there are several sizes. The wardrobe can be 350mm deep.If you want to hang a mens shirt, there should be a height of 960mm.The whole body mirror in the wardrobe is 1070mm x350mm. During installation, the upper end of the mirror is height, and you can reach the whole body.Multi -active shelves are used in the wardrobe, generally one grid every 250mm.This height is most suitable for putting clothes debris (I think it is small).
Overall wardrobe
Overall wardrobe
2. Wardrobe size
(1) The depth of the large wardrobe is generally 55-60 cm;
(2) The width of the flat cabinet door is the best between 45-60 cm, and the width of the sliding cabinet door is the best between 60-80 cm;The door panel should not be too wide and too heavy.
(3) The height of the hanging coat is 140 cm enough;
(4) The height of the hanging top is between 85-95 cm;
(5) The height of hanging pants is between 80-90 cm;
(6) The height of the existence is relatively flexible, and it is about 30 cm.
This space is mainly to store the quilt that is not used in the season, which is usually at the top of the wardrobe.
(7) The height of the shoe box can be designed according to the height of the two shoe boxes, controlling at 25-30 cm;
(8) The height of the back bag is even more flexible. From the perspective of the overall design of the wardrobe, you should consider the size requirements of other spaces as much as possible to achieve "flat". This space in my family is consistent with the size of the existing space.Essence
(9) When installing the hanging rod, you should pay attention. The hanging rod must use the actual depth of the wardrobe as the standard as a standard, and the board must be 4-6 cm away from the above.The distance is too short, and it will be laborious to put on the clothing in the future; the distance is too long, and it is a waste of space.
Hanging clothes also belong to the hardware series, and I still recommend that you dont have a cheap picture.There should be at least two to three screws on both sides of the good clothes rod. When positioning and punching, be sure to pay attention. Installing three hanging clothes poles for "Storage" uses me a whole afternoon and a brain door.sweat.
(10) The installation height of the hanging rod should be the best height of the hostess.Tip: If the height of the male owner is lower than the hostesss words.By the way, I heard that a successful man likes to find a woman taller than himself. I dont know if it is true.
3. Follow the design size specification of the wardrobe
Generally speaking, every storage space in the wardrobe is particular about size.
According to the designer, the height of the cabinet of the short or suit is not less than 80cm; the height of the cabinet of the long coat is not less than 130cm;
As for the cabinet with stacked clothes, after the width of the folding of the clothes, the width of the cabinet is between 33cm and 40cm, and the height is not less than 35cm;
The upper end of the entire wardrobe is usually set to place non -commonly used objects such as quilts, and the height is not less than 40cm.
The TV cabinet is generally designed according to the height of the bed in the home. The designer said that the height of the normal bed is 45cm. Then, the height of the TV cabinet is not less than 45cm away from the ground. It is usually appropriate for 60cm to 75cm, and it is appropriate to be 60cm ～ 75cm, and it is appropriate to use 60cm ～ 75cm, and it is appropriate to be 60cm to 75cm, and it is advisable.Considering the heat dissipation space, it is best to keep the height of the cabinet at 90cm, and the height of the DVD cabinet supporting the TV is not less than 15cm.
The raw material of the overall wardrobe
The plate is the main component of the overall wardrobe, and its quality directly determines the quality of the product.The wardrobe plate on the market is mainly artificial board, and there are very few solid wood.The artificial board is divided into splints, particles (particle plates), fiber board, and solid wood multi -layer plate. Among them, the fiber plate has high density, median density, and low density.
1. Solid wood granular board: The middle long wood fiber+fine wood fiber on both sides, suppress it into a plate.Ship board: Taking the trunk of artificial forests and natural forests, branches and branches, processing or shaving, and high temperature and high pressure.The advantage is that the expansion rate, stability, and strong nailing power.The disadvantage is that the surface is not milling.Therefore, solid wood granular boards are more suitable for more dry environments such as wardrobe.
2. Density board (fiber plate): Broken the wood, maintain the original fiber to form it through high temperature, the surface is flat, and has the advantages of easy milling type.In terms of intensity and hardness, it is better than the gripping board.But there are also disadvantages, not blisters.The expansion amount after blistering is about 2mm.
3. Wood -plastic louvery: Wood -plastic louver has waterproof, mildew -resistant, insect -proof, antibacterial, acid -resistant, can be cleaned, environmentally friendly without formaldehyde, not easy to deform, non -cracking and flame retardant and fire self -extinguishing functionEssenceThe surface of the wooden plastic louver is well treated with good smoothness, no obvious defects, and the texture is obviously stronger than the density board.Moreover, the coating is pasted, the intensity is high, and it is not easy to bubble in the sun or humid environment.However, the price is relatively expensive. The quality of the narrow door movement is slightly lighter. The hollow structure is not very popular.
The above three plates are all the artificial plates, and none of them are soaked in water.Therefore, the cabinet installed staff will put bright waterproof tin foil at the incision when assembling cabinets.
As for the density board louver, it does not prevent moisture, water absorption and swelling, easy to grow mold, humid and long green hair, can not be cleaned, not to mention, and formaldehyde release.Easy to deform, non -flame retardant, low price, weight suitable for moving doors, solid structure, high popularity.
4. Multi -layer plates: solid wood multi -layer plates are made of three -layer or multi -layer sheets or thin plates through wooden plates and high temperature and high pressure.Globe, the surface is made of high -quality solid wood paste or technology wood. It is made from cold pressure, heat pressure, sand light, health, etc.Large, good inner quality, good flatness, and layer panels with different thickness of 5-40mm according to demand.Multi -layer solid wood board also has the characteristics of difficulty deformation and good performance of the indoor temperature and humidity.After the melamine surface, the surface of the plate has natural and real wood texture and feel, which can bring more choices for consumers.
Border material
All the border materials of all wardrobes on the market are four categories: aluminum alloy, aluminum titanium alloy, magnesium titanium alloy and high -quality color steel. Generally speaking, magnesium titanium alloy, aluminum titanium alloy high strength, durable, strong quality can ensure that the cabinet door Gundam is Gundam.The 2.8 -meter does not deform and slide smoothly.The quality of the carbon steel frame is light and thin, and the appearance is sprayed with paint.
The pulley of the wardrobe is divided into the upper and the next wheels.In the last round, the door was guarded, and the role was to make the door slide smoothly when pushing parallel.The next round is divided into hidden wheels. Pure nylon is loaded. The semi -circular rolling rolling is gravitated through the wheels, so the horizontal line is used to push.The weight can reach 200 kilograms, the abrasion resistance is high, and the lifting life can reach more than 300,000 times.
Some brands use a set of previous rounds (suspension), so that the next round must bear the weight and play a guidance. The pressure is too large. After two or three months, it is easy to deform and the service life is not high.A better manufacturer uses the upper and lower groups of wheels, upper orbit orientation, and lower orbit load, so as to better protect the pulley, so that the maximum load of the pulley can reach 200 kg, and the service life can be more than 300,000 times.
Installation tool for the overall wardrobe
1.Inspeal drill: Fix the hanging cabinet to beat the wooden plug holes, expand screws.
2.Electric batch: open holes, three -in -one screws, fixed screws, and adjusting various drills.
3.Chainsaw (weaving combine): open holes (above 53㎜), cut.
4.Hammer: nail, adjust the components minimally.
5.Corner ruler: vertical line, open hole on -site, cutting positioning.
6.Pull ruler: measuring board, cabinet size.
7.Wallpaper knife: disassembling bags, cutting pencils, and repairing.
8.字 字 镙 (+word): One length of the length: screw screw, eccentricity, the door hinge.
9.字 字 镙 ( -word): one length of each: screw screw, eccentricity.
10.Short planing: The trimming plate is not smooth or adjusting the size.
11.Steel saws: cut clothes, upper and lower rails and other metal materials.
12.Tablet 金: Repair the burr of the plane of the metal parts.
13.Glass rubber gun: Play glass glue fixed plate or close.
14.Hexagonal wrench: adjust the partition inner bottom wheel.
15.Steel tongs: tong nails, repair hardware.
16.Φ53㎜ diamond: open hole in the computer.
17.Φ35㎜ diamond: door rehns.
18.Φ19㎜ diamond: drawer lock hole.
19.Φ15㎜ diamond: Sanhe and one large cake hole.
20.Φ10㎜ diamond: three -in -one glue plug holes.
twenty one.Φ8 ： diamond: three -in -one connecting pores.
twenty two.Φ6 ： diamond: Movement plate grain hole.
twenty three.Φ5 ： diamond: pull the hand hole.
twenty four.Φ4 ： diamond: pull the hand hole.
25.Pencil: Line on -site.
26.Blade: Configuration, cutting.
27.Glass glue: Configuration, fixed, closed -collection.
28.Batch head: configuration product, electricity batch.
29.Steel saw strip: configuration product, cutting.
30.Chainsaw: Configuration, for chainsaw.
31.Silk: A small amount of various types.
32.Back panel nail: a small amount.
33.Door hinge: Entry column, full cover, half a cover.
34.Three -in -one (set): Fixed quantity as depending on the situation.

Related tags： Houseware