Intelligent drying rack is an integrated multi -functional intelligent drying rack that improved on the traditional hand -shaking drying rack.Use remote control or convenient voice to control the functions of lighting, sterilization, air drying, drying, etc., so that no matter what weather, you can wear healthy and comfortable clothing.Through the positive and reversal of the motor, the functions of the clothes rod and decline.The system chip control that is stopped immediately allows modern life to integrate intelligence and security.For the health and comfort of the family, the emergence and rapid development of intelligent drying racks have been promoted.
How to use smart drying racks
1. Installation and preparation of intelligent drying racks
1. Make sure that the power cord is reserved at both ends of the installation location, and the power supply must have ground wires.
2. Installation ensure that the power supply is closed, and the input voltage is between 180-220V 50Hz.
3. If there is only one period of the power cord, the power cord must be led to a certain length.The distance between the two holes is the length of the hanger.
4. Prepare to install tools, such as tape measures, signs and electric diamonds.
2. Measurement location, electric drill and punching
Then measure the installation location, first measure the length of the smart electric drying rack, determine the installation location of the fixed parts at both ends according to the length of the smart electric drying rack, and then measure the width of the balcony and mark it out.Then punch in the marking position.
Third, install fixed parts
Complete the fixed part with the expansion screw, and then install the fixed parts on both sides with an electric drill.
Fourth, the installation of intelligent electric rack boxes
There is a rectangular interface connected to a fixed device on both sides of the intelligent electric drying rack box.Clert the two interfaces, install fixtures on both sides, and then fix the drying box on the fixture door with a screw.
5. Install the bracket group
The fixed bolt to be used by the bracket will be fixed with folding arm directly with a fixed bolt. On the other hand, the same side will be fixed, fixed on the connecting hole of the folding arm.Then tighten with a hanging bolt screw. On the other side, the same operation is used to pass the steel wire rope through the hoisting hole, and then tighten it with a hanging screw.
6. Connection power supply
Be careful not to connect to the connection. Generally, when the connection power is successful, the drying rack will make a "drop" sound indicating that the connection is successful.
Seven, connecting the drying pole
First of all, you need to assemble the drying rod accessories. Put the drying rod into the half -ends of the lifting frame. After the drying rod is placed in the ring ends at both ends of the lifting frame, use the tube to hold the drying pole and install the tube screw.
8. Adjust the drying rod
Adjust the spacing of the four corners with rolls, keep the lifting frame into vertical state, facilitate the lifting frame, and the lifting is smooth. After the adjustment, you can tighten the screws.
Precautions for intelligent drying racks
In order to prevent the use of electric shock in the intelligent drying rack, please do not expose the host out of the place where the outdoor may be drenched by rain.It should be settled on the balcony to avoid the rain, and the intelligent drying rack is installed on a stable local area to prevent the device from falling into severe damage.Before cleaning equipment, please disconnect the power, do not use corrosive cleaner for cleaning.In order to use rest assured, the intelligent drying rack must be ground wire, please connect the ground wire during the device.Do not disassemble the drying rack privately. When you need to check and repair, please contact the manufacturer first, and organize special personnel to organize it.
When the ups and downs of the smart clothes rack swinging are large, do not operate the drying rack at the moment to avoid causing the wire plate to be dislocated or damaged the machine.During the lifting of the clothes drying rod, the foreign body was stopped to pierce the foreign body into the elastic rack to avoid the formation of machine harm.When the ultraviolet lamp function of the intelligent drying rack is used to poison the clothes, the personnel should not be exposed to ultraviolet rays for a long time.When sun -exposure, the weight of the two ends should be balanced, and over time, the clothes rod and the rack shape will be formed.When operating a smart drying rack, do not connect the wire rope to the elastic rack.Otherwise, it may cause damage to the machine or personnel.
In the process of using the intelligent drying rack, it is necessary to pay attention to the matters as described above. Any object has its own correct application method. It is operated according to the method. It is guaranteed by machines and personal guarantees.Users who do not know much about the principle of intelligent drying rack should not be disassembled and cleaned privately, and they are handed over to the special personnel or under the guidance of specialized personnel.The service life of the intelligent drying rack is not short. It is protected and can extend the service life.

Related tags： Houseware