The charging flashlight does not need to replace the battery frequently, so it is more convenient and faster than ordinary flashlights. Therefore, the flashlights on the market are mostly charging flashlights, and the use of charging flashlights is more attention than other flashlights. ThereforeThe use of flashlights is very important. Let ’s understand the correct way of using the charging flashlight with Xiaobian.
Precautions for charging flashlights
Assuming that your strong light flashlight is not used properly, there will be faults such as flashlight Changming, fire breaking, switching, running, and coating.The following is the precautions for the use of flashlights and maintenance:
1. Wipe it with a soft cloth immediately after using the flashlight to prevent the use of humidity and hand sweat in rainy days.Otherwise, the coating of the flashlight is easy to fall off or rust.
2. Do not put the flashlight on the hot cymbal or the stove, and avoid steaming the smoke, otherwise the flashlight is prone to running electricity.
3. When moving the flashlight switch, the force must be light and uniform to maintain the elasticity of the reed.
4. The bottom cover should be stirred or removed when it goes off to avoid the bottom cover from breaking the bottom of the battery and flowing the slurry.
5. If the silver plating of the light bowl is stained, it affects the reflection of light. You can use clean cotton to wipe it out. Do not play with your hands.
6. When installing a battery, put it in the paper cover together, otherwise the most easy to run.After using the new battery for a period of time, the position can be replaced, so that the service life of the battery can be extended.
7. Generally, the battery stops glowing at minus 20 degrees, so pay attention to thermal insulation in the cold season.
8. Do not always expose to the sun when the strong light flashlight is not used. Do not flash back and forth when not in use.
How to use charging flashlights is more standardized
The first charging of the electrical appliances using the charging battery can be regarded as very important. Not only is it good but also full, this is to be done for the life of the battery and long -term use.
When used for the first time, please be full first. When not in use, you must replenish the power within three months.
When the lighting of the flashlight is obviously darkened, please charge it in time, otherwise it will affect the battery life.
Please note: Do not use the product when charging.
Now the general LED charging flashlight is a lithium battery. It has no memory effect and can be used with charging. Generally, the LED charging flashlight will be charged to about 80%-100%when they leave the factory, but the battery will slowly slowly will slowly.During discharge, the lithium battery is relatively low from the self -discharge rate, but as the storage time is prolonged, the power will be relatively reduced.
There is a great relationship between power and storage time.Under normal circumstances, it is available to buy. When the brightness of the LED bulb becomes darker, it must be charged in time. Generally, lithium batteries should not be charged too much or discharge.Now some control circuits are designed well and there are perfect protection measures, so that the maintenance requirements for batteries will be much lower.
In the early years, nickel -cadmium batteries produced in the early years have memory effects and high maintenance requirements.Lead -acid batteries are low in price, but now small -capacity batteries are mostly lithium batteries.
How long does it take to charge the charging flashlight
At first charging for 12 hours, the first three times need to be sufficient.The charging flashlight is generally a lead battery, and it can basically be full for four or five hours. If it is a lithium battery, it is recommended to be full.It is best not to let the flashlight be charged at all times, so as not to shorten the life of the flashlight.

Related tags： Houseware