When you need to use hot boiling water in public places, water -boiling heaters are often used. The water boiling heater is suitable for most public places. Compared with the water dispenser, the hot kettle is convenient and fast.For boiling water, there is basically no need to control the boiling water heater and transport water, and the water volume is large, and the hot water can be accurately provided when there is a large amount of people. So how to maintain and clean the water heater?
How to clean the inner biliary
1. Discover the hot water inlet nut to block the water outlet to prevent the water from the water heater from flowing out.At the same time, the cold water mouth nut was opened, and the hose (the shower tube can be). Until the cold water outlet does not flow out, 50L water heater, drainage for about 1 hour.
2. Remove the hose connected to the cold water inlet, connect the hose to the hot water port, receive the faucet, open the faucet and irrigate for 1 minute, and block the cold water mouth, let the cold water put it in the inner bile for a while, and then put it in the inner bile, and then put it in the inner bile for a while, and then put it in the inner bile.Open the cold water outlet and drain it, repeated several times until the discharged water is clean.
3. After the water flows out, close it.When cleaning, before cleaning, the water temperature of the water heater is better below 50 ° C. Such a water temperature can be directly discharged to the sewer pipe, which will not affect the pipeline.When cleaning, if there is a sewage port, it can be opened at the same time, because the location of the sewage port is lower than the cold water outlet, and the sewage is more thorough.
How to get a scalar at the electric boiling water device
1. Burn a small amount of vinegar and add the electric boiling water heater, soak for an hour, and shake up and down, left and right, the scale in the electric water heater will fall off.
2. Put some paper scraps in the electric water heater, then pour in warm salt water, and shake it gently for a while, the scale can be removed.
3. Pour the appropriate amount of water with 1%of the small soda.
4. Take a small amount of dilute hydrochloric acid discharged in the water heater for a while, and then shake it to remove the scale.
Pay attention to the maintenance
1. Do not install the boiling water heater in a humid environment, such as the bathroom.Because the air in the bathroom is humid, after the water steam enters the electrical box, it is easy to condense on the surface of the insulating medium, reducing its insulation performance and causing a leakage accident.
2. When using the water heater, you should first fill the water and then connect the power. Do not adjust the temperature controller at will to prevent the temperature controller from adjusting the temperature above the boiling point.
3. During the use process, do not easily remove the grounding wire of the water heater, because grounding measures are the last protection measures to prevent electric shock.
4. It is necessary to regularly check the water inlet source of the water heater to prevent the water inlet from blocking the water inlet and avoid the phenomenon of dried heat pipes.
5. Removal regularly.If the local water quality is inferior, the water purifier can be installed at the water inlet of the water inlet to improve the work efficiency of the water driver, extend the service life, and ensure the cleanliness of drinking water.
6. The water and power supply of the water heater must be cut off before maintenance and cleaning the water heater.When cleaning the shell of the boiling water heater, wipe the clean rag. It is strictly forbidden to rinse the shell and electrical box part with a spray water flow.
7. When there is a problem, contact the professional after -sales person in time.
8. Regularly clean the inner biliary. When used for a long time, after the trace impurities and minerals contained in the water have been precipitated for a long time, if it is cleaned from time to time, it will affect the quality of the water and the service life. It is best to choose a home improvement water purifier, or a high -quality ones.The boiling water heater that can be dehydrated and heating pipes can be improved to improve the efficiency of electricity consumption.
9. For regular inspections of not less than one year, carefully detect and exclude safety performance and other potential hidden dangers.
10. When not in use for a long time, turn off the power and empty the water storage of the inner bilots. The specific method refers to the product manual.
11. In order to ensure the normal use of the water boiling heater, to ensure the cleanliness and clean of the water driver, and replace the filter element regularly.

Related tags： Houseware