Generally, the rotor and stator of the motor are packed in the coat. For the sake of the plate, the stator is on the flat substrate, and the rotor is covered on the stator. Generally, the stator is a coil.EssenceAlso known as disc motor.
Self -made disk motor
The motor is mainly composed of two parts: coil and magnetic pole, so it is necessary to make a small motor. In addition to one magnet, about one -meter -long lacquered copper thread, two stitches, two nails, 5 dry batteries, transparent glue, transparent glue, transparent glueIn addition to equipment such as wires, small wooden boards, tiger clamps, knife and other tools are also needed.
Plate motor principle
The disk motor is connected to the coil and then the direction of the pad, and the fixed -fixed direction of the rotation shaft.They will rotate with the motor shaft, and they must ensure that they are insulating between the switching and the turn -oriented film and the rotation shaft.The brush is always fixed in the space, and it will not turn the work of the motor.The voltage added to the two electric brushes is a DC voltage. Because the action of the brush and the switchor is used to introduce the electric energy into the engine coil, and the current in the same inner coil has always been in a direction, there is no direction change, there is no direction change.As a result, the direction of the electromagnetic force that is affected by the pole down coil will not change, and it also guarantees that the motor can rotate continuously, so as to realize the transformation of electrical energy to mechanical energy to drag production machinery. This is the DC motor.working principle.
Discicel parameter
Like other motors, the disc motor also has its corresponding technical parameters. The technical parameters of the disc motor mainly include data from normal working current, maximum power, motor resistance, no load current, support voltage, maximum current and other aspects.
Discicel structure
The structure of the disc motor adopts a very novel staggered segmented coil array structure. Through segmented electromagnetic arrangement technology, a single coil is arranged staggered, and a thin discs of coil array is formed.Correspondingly, its magnet also uses a flat ring -shaped and axial interval structure.This structural design can minimize the thickness of the coil and magnet, so that it can get the maximum magnetic flux and significantly improve the electric interaction between the coil and the magnet.
Discicel model
Specific information such as disc motor models, the Y series motor efficiency, energy saving, low noise, small vibration and high safety performance.The Y80-315 motor uses B-level insulation, and the Y355 motor uses an F-class insulation.Y355 motor meets the technical conditions of the Y series (IP44) three-phase different step motor JB5274-91.

Related tags： Machinery