Swilm machine, also known as electric filament, electric tube filament machine, twisted wire, tube thread wire machine, reinforcement wire.The silk machine is to electrize the manual tube threading panel before 1980. It makes the pipe thread processing relaxed and fast during the installation of the pipeline.
What is a set of wire machine
The silk machine consists of the body, the motor, the reducer, the tube of the mount, the plate tooth head, the cutting of the knife, and the knife system.Easy, fast, and reduced the labor intensity of pipeline installation workers.The silk machine can be slowly put on the steel pipe, tightening, fuel injection, rotation, rotation, re -rotation, re -rotating, and fuel injection.In this way, keep working continuously, you can engrave a beautiful screw pattern on the steel pipe.Many large diameter steel bars are connected with mechanical sets. The two steel bars are connected with a straight thread connector. The silk machine is also used in the connector of the continuous wall.
What are the types of reinforced ribs?
The model of the silk machine is generally: 2-inch set machine (50 types), and the processing range is: 1/2-2 (inch) Another plate to expand the processing range: 1/4-2 (inch)
The processing range of the 3-inch set (80) is: 1/2-3 (inch)
Board tooth is the most routine damage part of the silk machine. Depending on the thread, there are different specifications of plate tooth:
Classified by the screw distance: British board teeth (BSPT)
Classified by plate tooth materials: Tool steel plate teeth (for processing silk mouth such as galvanized pipes, seamless steel pipes, round steel bars, copper, aluminum materials).
High -speed steel plate teeth (for stainless steel pipes, stainless steel round stick processing silk port).
The angle of the teeth of the British plate teeth (BSPT) is 55 degrees.
The angle of the teeth of the US -made plate tooth (NPT) board is 60 degrees.
How to use the silk machine
1. Select the appropriate plate tooth group according to the pipe diameter.(There are two sets of numbers on each set of plate teeth, one group is the specifications of the plate tooth, each of which is the same as: 3/4, and the other is the installation sequence number such as: 1, 2, 3, 4).
2. Remove the head of the plate from the slide (lifted), release the handle nut, turn the curve plate, and make the curve plate to the largest position.
3. Put the selected plate tooth group into the alveolar one by one according to the corresponding order number. The locking gap will match the curve plate, and then pull the curve plate to make the scale indicator line on the curve disk and the required processing incomeThe scaled ruler is aligned, and the handle nut is tightened.
4. Walking the variable distance to the position you need.

Related tags： Machinery