The full station, that is, the Electronic Total Station, is a high -tech measuring instrument integrating light, machine, and electric), The measurement and mapping instrument system that integrates high difference measurement functions.Comparing the ethics and latitude instrument to compare the electronic latitude and latitude instrument to replace the optical disk with optoelectronic scanning disk, and automatically record and display the number of readings and display the number of readings of the artificial optical science test, which simplifies the corner operation operation, and avoids the generation of reading errors.
Full -site instrument model
Sangle -on -sample of the whole station
First of all, we need to choose two known points, and these two points, one as a test point, the other is the rear viewpoint.Points to make good marks, and we must also make good marks on our drawings. Next, we take out the entire station instrument. The whole station instrument is fixed on the test point and adjusted horizontally. After that, we place it on the back viewpointOn the top, the center of the whole station instrument has entered the program selection interface to select the coordinate sample.After entering the coordinate sample interface, select the direction angle, and then enter the test point name, enter the test site and its high journey, and then enter the viewpoint interface after setting the settings.Then enter the point interface, enter the instrument height, click OK, then enter the coordinate one by one, adjust the angle, and find it to find it.
The price of the whole station
The price of 40 meters 60 meters 60 meters, 60 meters, 60-meter laser ranging meter holding the infrared measuring instrument Laser electrical ruler price is 142 ~ 183 yuan Katida KTS-442 full station KB-20C/KB-45 battery/Kalida KC-20A 20AThe price of the whole station is 55 ~ 220 yuan
How to use the whole station instrument
1. Horizontal measurement method: First open the keys of the measurement angle. At this time, the whole station enters a mode of measurement specifically for measurement.Settings, set the level to 0 degrees, and finally align the whole station instrument to the second thing to be measured. At this time, the horizontal degree is the angle of the two objects.2. Measurement method of distance: First of all, set up the frequency of prism. Before the distance tests, enter a certain prism constant into the entire station instrument, so that the whole station will correct it according to the necktostal constant, and then set the settings before setting up the settings.In the values ??of the external environment such as temperature value and air pressure, in the actual test of the whole station, after entering the air pressure and temperature in the whole station instrument, the instrument can measure some distance, and then the height and height and height of the instrument can be measured.The prism is measured and recorded, and all the distance can be tested in the end.

Related tags： Machinery