Sowing is the most important production link in the process of agricultural production. The seeding machine can accurately send seeds and chemical fertilizer to the bed in accordance with agronomy requirements.Quality provides reliable guarantees for farmers increase in yield and income.Let ’s take a look at how to buy a seeder with Xiaobian!
Principles of sowing machine
Drive the gaunting device and fertilizer through the transmission system, and the seeds of fertilizer will enter the seeds and fertilizers from the seeds and fertilizers from the seeds and fertilizers from the required fertilizer box to the groove and ditch that are opened by the ditch.Later, the soil covered the soil and the soil, and the device pressed the real bed to complete the sowing operation.
How to use the seeding machine
When sowing, the sowing machine should be sowed according to the characteristics of the seeds.If the spacing of sowing should be controlled at about 20 cm, it should not be too wide or too narrow.The seeding depth should be controlled at 1.5-3.0 cm, but it is also necessary to consider special circumstances. The depth of different soil sowing is also different.Growth.Therefore, when planting agricultural machinery, it is necessary to fully consider the conditions of seeds, soil, etc. to ensure the healthy growth of the seeds.
Frequently fault maintenance of sowing machines
(1) Uniform spacing spacing or uneven seed distribution
Reasons: The operating speed is too fast; the seed cup is blocked; the breeding tube is blocked;Removal method: reduce the operating speed; clean the seed cup; clean the seed tube.
(2) Uniform depth of seeding
Reason: The operating speed is too fast; the operating conditions are too wet; the seeding machine is uneven;Removal method: reduce operation speed; suitable operation when suitable.
(3) The ditch discs cannot rotate normally
Reasons: The stubble or soil is gathered on the disc scolca;Removal method: Clean the scraper; adjust the scraper.
(4) Too much seeds are crushed
Reason: The length of the cup slot wheel is not large enough;Removal method: reduce the operating speed; open the cup groove wheel to wide enough; zoom in the tongue door of the cup.
(5) The effect is not good
Reasons: too humid or too much soil; the height of the connection is incorrect; the exclusion method: wait until the dry work or re -ground; adjust the hanging height;
(6) Blocking of the wheel or ditch device
Reason: The sowing conditions are too wet; the lower pressure of the opening device is too great; the backward is backward; the discalities cannot work.Removal method: Reduce the lower pressure of the ditch; replace the bearings.
(7) It is difficult or unable to rise or landing the seeding machine
Reason: hydraulic equipment leakage.Removal method: Check and repair.
(8) The depth of the plow sword is not enough
Reason: There is no enough weight; the height of the connection with the tractor is too high; the ground wheel supports the seeder.Exclusion method: increase weight; reduce the height of the hanging connection; adjust the height of the ground wheel.
(9) The plow knife or sowing is too deep
Reasons: The depth of the settings is inappropriate; the wheel adjustment is incorrect; the seeding machine is too heavy.Removal method: Set depth of depth; set the shallow position; reduce the weight.

Related tags： Machinery