What are the effects of cutting fluid?What is the composition of the cutting liquid formula?If your daily work will be exposed to the cutting fluid, then you must understand what brand of cutting fluid is good.Let ’s take a look at how to choose the cutting fluid with Xiaobian!
How to choose the cutting fluid
1. The effect of the cutting fluid depends on the performance of the cutting solution itself, but also depends on factors such as the workpiece materials, tool materials and processing methods. It should be comprehensive consideration when choosing.
2. Rough processing and semi -semi -essence processing is large during cutting, so the role of cutting solution should be mainly cooling and heat dissipation.In order to obtain good processing surface quality during precision processing and ultra -precision processing, the cutting fluid should be lubricated.
3. The heat resistance of hard alloy knives is better, and generally does not need to be cut.
4. Due to the cutting and processing of difficult processing materials, they are at high temperature and high pressure
The boundary lubricating friction is used, so polar pressure cutting oil or polar pressure emulsion should be used.
5. The characteristics of grinding are high temperature, which will produce a large amount of fine dandruff and sand particles. Therefore, the grinding fluid should have better cooling and cleaning properties, and should have a certain lubrication and rust resistance.
What to do if the cutting fluid is allergic
Cutting oil is an indispensable and commonly used chemical in industry.However, some factories, such as Mr. Liu who worked in a CNC machine tool in Suzhou, had a phenomenon of cutting liquid allergies when using cut oil. There were several such situations that happened to colleagues working in the same factory.What should I do if I amia -allergic to cutting oil? Lets take a look below.
First of all, lets take a look at the cause of allergies to cutting oil.There are several main reasons for workers to have cutting oil allergies. One is caused by high pH values, and some ingredients contained in cutting oil are allergic to workers.There are other reasons such as insoluble metal and machinery.The concentration solution is too high.The protective suspension layer on the surface of the cutting solution, such as a closed layer and anti -foam layer.Sterilizers and unclean cutting fluids.
So if we avoid cutting oil allergies? In the work, in order to avoid the skin allergies of workers, we should pay attention to the following: First, the operator should apply protective oil, wear work clothes, and gloves. Pay attention to avoid direct contact with the cut oil.The proportion of concentrated solution in the cutting oil must be used according to the recommended value of the cutting oil.Use a bactericide to be used according to the dose in the instructions.
Specification of the use of cutting fluid
During the process of workshop processing, the application needs of cutting fluid products are more frequent.It should be noted that the application of such products must pay attention to basic security issues, because the composition of the composition of the relationship that needs to be directly contacted must be reasonably distinguished.According to regulations, enterprises must do environmental protection and wastewater treatment in accordance with relevant requirements, and provide employees with a safe and healthy working environment.Therefore, as one of the important parts, the reasonable selection and use specifications of the cutting fluid must also be emphasized.Different cutting fluid products are different because of the manufacturers, their characteristics and use requirements are different, which requires careful reading before specific operations.

Related tags： Machinery