The water control machine is mainly composed of the three parts of the electronic control module, the IC card and the distribution base table. ☆ Electronic control module is the core of the hydraulic machine.It is responsible for the control of the sampling, billing, and display of the water control machine. At the same time, it takes corresponding measures for the operation status of the water control machine to process it in time, and then the important data of the operation will be saved for future use and analysis.
Hydraulic machine repair
Question: After the water control machine is connected, the machine cannot be detected in the software, and how to repair it.Answer: As a result, there are several cases: A. The communication line of the water control machine is not connected.B, 485 communication device lines are reversed C. The communication line connector of the water control machine fails. D, the network controller falls off from the computer host. The main line of the communication line occurs .F, the communication chip is bad, please be a manufacturerOr contact agent.
What is a water controller
The water control machine transforms cash currency into electronic currencies through the server and stores in the IC card electronic wallet. When consumers need to consume, they only need to land the IC card on the water control machine to consume, deduct the consumption amount from the card.So as to complete the entire transaction process.There is no cash participation in the transaction process, and smart consumption is truly realized.
Water controller working principle
Installation of each water -out terminal installation Time (quantity) IC card water controller.Before use, put the IC card memory into the appropriate amount. When using the recharged IC card to use it, the card is provided to the sensor area of ??the water controller.), And deduct the amount used from the card according to the pre -set rate.
Instructions for Using Water Control Machine
The water control machine is mainly composed of three parts: electronic control module, IC card and sending base table: the electronic control module is the core of the hydraulic machine.It is responsible for the control of the sampling, billing, and display of the water control machine. At the same time, it takes corresponding measures for the operation status of the water control machine to process it in time, and then the important data of the operation will be saved for future use and analysis.The principle of the water control machine is to convert cash currency into electronic currencies through the server and store in the IC card electronic wallet. When consumers need to consume, they can be consumed by the IC card on the water control machine and deduct from the card to deduct from the card.The consumption amount is completed to complete the entire transaction process.
Water controller installation
Take out the water control machine from the box to check whether the case is intact; connect the DC12V power supply; see if the machine can start normally.Equipment installation: Configure the actual pipeline to fix the water controller on the water pipes that need to be controlled; the back of the water control device is designed with a fixed hook.Correctly, turn on the power switch after checking without error, and the LCD display is on; debug device: Use the setting card to set the rate; after the settings are successful, you can do normal work; if the parameters need to be modified in the future, you can set up a card.

Related tags： Machinery