The gold -phase polishing machine consists of basic components such as base, throwing, polishing fabric, polishing cover and cover.The motor is fixed on the base, and the cone cone for fixed polishing disc is connected to the motor shaft through screws.After the polishing fabric is tightened on the polishing plate through the sleeve circle. After the motor starts with the switch on the base to start the power, you can use your hand to apply pressure on the sample to polish the rotating polishing disc.
Gold phase polishing machine model
The models of the gold-phase polishing machine include P-2T, P-2G, etc.1. If noise occurs, please turn off the switch quickly and find the person in charge to repair 2. When polishing type, be sure to chag up to extend the life of the polishing cloth 3. To prevent burns during samples. Pay attention to cooling with water. When polishing, pay attention to adding adding.Polishing
Gold phase polishing machine price
The price of gold -phase polishing machines is mainly different from the brand, different specifications, and variety of types.The more common brands such as Makita570w-1600W Gold-phase polishing machine at 1759 yuan/units -2385 yuan/units, and Macai Pacific 1200W disc gold phase polishing machine is about 2649 yuan/set, while the same specifications of roller gold-type goldThe phase polishing machine is much more expensive, the price is 7,000 yuan/set.Of course, there are many other brands and specifications of the gold -phase polishing machine. The prices are different.
Gold phase polishing machine operating procedure
1. Prepare work to check whether the machine is placed on a flat workbench; whether the parts of each part are complete, whether the fastener is loosened, and do a good job of cleaning; check whether the water inlet and drainage are normal.2. Operation 1 Paste the polishing cloth on the polishing plate. When paste, you must apply a small amount of oil on the plate at a time to facilitate replacement of the polishing cloth again. Wash the polishing cloth with water before polishing.2 Press the cover tightly in the dish and drop the appropriate amount of polishing or polishing cream and water on the surface of the polishing cloth.3 Open the faucet and spin the power switch to the "open" position. The motor starts to polish.4 When polishing, polish while adding water to control the flow of water by rotating and adding water switches.5 Polish, turn off the water switch, cut off the power, and turn off the water inlet faucet.

Related tags： Machinery