The forklift is a handling vehicle for loading, unloading, stacking, and short -range transportation operations of the tray cargo.The loading and unloading and handling operation of the tray cargo is an indispensable equipment for tray transportation and container transportation.Let ’s take a look at the types of forklifts with Xiaobian?How to open it?
What types of forklifts are there
Forklifts can usually be divided into three categories: internal combustion forklifts, electric forklifts and warehousing forklifts.
(1) Internal combustion forklift
Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy forklifts, container forklifts and side forklifts.
(2) electric forklift
The motor is the power and the battery is the energy.The carrying capacity is 1.0 to 4.8 tons, and the width of the operating channel is generally 3.5 to 5.0 meters.Because there is no pollution and small noise, it is widely used in working conditions with higher environmental requirements, such as medicine, food and other industries.Because each battery usually needs to be charged after about 8 hours of working, it needs to be equipped with a spare battery for the multi -class working conditions.
How to test for forklift certificate
Before the forklift certificate, you must first learn the drivers forklift, and train it through a regular training institution. Then the training institution shall be reported to the driver by the municipal security supervision bureaus personnel.
Article 38 of the Special Equipment Safety Supervision Regulations: "Boiler, pressure vessels, elevators, lifting machinery, passenger ropeways, large amusement facilities, field (factories) operators and related managers in the field (plant) shall shallIn accordance with relevant national regulations, qualifying the assessment of special equipment safety supervision and management departments, and obtaining a certificate of special operators in the national unified format can be obtained in order to engage in the corresponding operations or management work.
How to drive a forklift
1. Step on the clutch pedal, start the engine, gradually increase the temperature of the engine, properly manipulate the multi-road valve, and raise the fork to leave the ground about 15-20cm.
2. Hanging low -end, choose to go forward or back, gently lift the clutch, slow the tank door, and forklift start.
3. Place, go to the place of pickup, slow down the speed, adjust the height and level of the fork, step on the clutch lightly, half linkage, adjust the direction, and only go to the fork to enter all the goods.Essence
4. When moving the forklift, the speed should be slow, the car should be stable, and use less brakes.
5. Put the goods, the forklift to the place where the goods are placed, slow down the speed, and move the manipulating rod. After the goods are stabilized, the fork can get out of the car.

Related tags： Machinery