Two -in -one lightning -proof can be divided into two types: network power supply two -in -one minespin, video power supply two -in -one lightning device.The two -in -one mineproofer is a special lightning protection device tailor -made based on the specific characteristics of the IEC lightning protection requirements and the specific characteristics of the monitoring system camera. It is suitable for the power supply and video lines of video lines such as fixed cameras and infrared machines in the monitoring system (wave -proofYong) Protection.
Two -in -one lightning -proof wiring
1. Two -in -one lightning device is connected in series.2. Link -proof input terminal connects the outer rays, and the output end is connected to the input terminal of the protected device.3. The product should be matched with the working voltage of the protected equipment. Please connect according to the installation diagram during installation.4. The components in the lightning protection device are strictly inspected. Usually there is no need to maintain special maintenance. When the fault detection is performed, the resistance value of the measurement input and output should be ≤6Ω, and the resistance value of various core wires between the ground should be on the ground.It should be ≥10μΩ.If the data does not meet the above requirements, it means that the product is faulty, and it should be replaced in time to ensure the safety of the equipment.
Two -in -one lightning -proof brand
1. The Antan network camera lightning -proof monitoring equipment RJ45 This mineprone interface uses a full copper and copper needle to prevent all bad contact.The power supply input can be width to the DC12 to the AC220V. During the use, the red light turns on means that the lightning protection protection is normal.2. Thunderbolt Power Video Two -in -light anti -anti -anti -lighting circuit board design is reasonable, tightly deployed, saving installation space, solid materials, and high -reliability electronic components for lightning protection.The grounding lead uses a 2.5 -square millimeter of pure copper core high -quality wire, which meets the requirements of lightning protection specifications. The lightning protection grounding terminal is sealing, waterproof, moisture -proof, and corrosion.3. The five -star shield monitoring the two -in -one lightning -proof five -star shield lightning -proof power transmission channel adopts two self -recovery insurance devices, which can effectively resist lightning strikes.Both the power supply and control wiring terminals use first -line large manufacturers. You can clearly see the brand and model logo. The workmanship is solid, the connection is stable, and the use of reliable use. Repeatable insertion will not be damaged.

Related tags： Machinery