In the construction of various installation projects, the silk machine is often used. The filament machine is to electrize the manual tube thread twisted panel to make the pipe thread processing relaxed, fast, and reduce the labor of the pipeline installation workers.strength.Before choosing a wire machine, you must first understand which one is better?In this way, we can better use the tools and complete pipeline processing.Next, let ’s learn about the relevant knowledge of the silk machine with Xiaobian!
Working procedure of a silk machine
When working on the silk machine, first put the tube to be processed into the pipe card, the impact card is tightly, press the booster switch, the pipe will turn with the card, adjust the size of the plate tooth on the plate of the plate, and set the silk to set the silk. Set the silk.The mouth is short and short. Then move into the hand wheel in clockwise to make the plate tooth knife on the plate of the plate of the plate.When the silk mouth is processed to the pre -set length, the plate tooth knife will be opened automatically, and the silk port processing is over. Turn off the power, bump the card, remove the tube.
The silk machine also has a tube cutting function: put the tube into the tube card, the impact card is tight, start the switch, put down the cutting of the cutting of the knife device, pull the knife and wheel, so that the blade on the cutting frame moves toIf you want to cut the length point, rotate the handle on the cutting knife gradually, so that the blade squeezes the tube of the tube.
The operating process of the silk machine
1. The staff is not allowed to wear gloves and tie the cuffs tightly.
2. Long hair and long braids into the hat.
3. The machine tool should be kept clean.
4. You should check whether there are debris on the machine tool before driving.
5. After driving, turn to two to three minutes to make the mechanical parts smooth and smooth.
6. The effect of workpiece must not be trembling in the effect of rolling teeth during processing.
7. It is necessary to park the processing of processing contributions and change machine tools.
8. When the processing parts are slipped, the parking should be tuned.
9, mechanical hair problems should be parking, viewing and repairing.
10. End of work.
11. Cover the power supply to consolidate the smooth machine.
The maintenance and maintenance of the silk machine
1. Wash the oil disc every day. If the oil color is black or dirty, the fuel tank should be cleaned and put on new oil.
2. After work every day, clean the tooth and plate of the plate, check the teeth of the plate tooth, remove the dandruff between the teeth. If the damage is found, it should be replaced in time. You cannot only replace one when the plate tooth is replaced.
3. In order to ensure the lubrication of the front and rear bearing, the two oil cups on the main axis case should be cheered at the time of use, which must not be less than twice a day.
4. Check the cutting blade every week and find it in time when you find blunt.
5. Wash the fuel tank filter every week.

Related tags： Machinery