ABB inverter is a well -known inverter brand developed, produced, and sold by ABB Group.It is mainly used to control and adjust the speed of three -phase AC asynchronous motor, and with its stable performance, rich combination function, high -performance vector control technology, low -speed and high torque output, good dynamic characteristics, and super overload capacity.The inverter market occupies an important position.
ABB inverter repair
Clean the air filter cool duct and internal dust.Check whether the screws, bolts, and plug -in are loose, whether there is a short circuit phenomenon in the input and output electrical resistance of the ground and the phase resistance, which should be greater than tens of mega Euros.Whether the conductor and insulator have corrosion, if any, you should wipe it clean with alcohol in time.
ABB inverter failure code
1. The failure code is one; the name of the fault is overcurrent, that is, overcurrent; the problem is that the output current is too large and cannot run normally; the solution measures to prevent the motor from overloading, increasing the time of acceleration, the wiring or cable operation of the motor.2. The failure code is two; the failure name is the DCOvervolt; the problem is the high DC voltage in the circuit; the solution measures the static or transient voltage of the transmission power to reduce the time of static or transient voltage, increase the time to decelerate, Large -scale chopper, voltage controller of normal working state.
ABB inverter wiring
Control of ABB inverter wiring diagram: (1) Main circuit: In order to prevent ABB inverters from generating electromagnetic waves to affect other circuits, a electrical resistor is required.(2) Control loop: Can switch manual switching, so when faulty, it is necessary to run in a manual way.
ABB inverter instructions
Before operating the inverter, you must carefully check its instructions, otherwise there may be some unnecessary damage and danger.The instructions explained in detail the steps and precautions for each step, including the selection of preparation, location, the front panel movement, the installation inverter, the wiring, check the installation and the front panel installation and then power on and start.The model code on the inverter represents the structure of the product, the rated value of the output current, the rated voltage, and the shell protection level.There is also a detailed key function and specific display information of the assistant control drive.It also includes some specific parameter mode, etc., and mainly includes precautions such as the failure analysis and maintenance of the inverter.
ABB inverter price
ABB inverter model

Related tags： Machinery