The fluorescent lamp zone can produce a high -pressure and use this to play a brigade effect on the lamp. When the lamp is risen, its role is changed to the role of town flow, allowing the lamp to glow normally.
Fluorescent lamp ballast connection method
First connect the wiring of both ends of the lamp, and connect the fire line (red line) of the power plug to a wiring terminal of the ballast.The A -end A -end (we remember the two ends of the lamp as the A -side and B -end) connect to another wiring terminal of the ballaster.The other line of the A end and one line of the B -side are connected to the two ends of the Qihui device, and the other lines of the B -end and the zero line (blue line) of the plug (blue line) of the B -end are stuck with the insulating tape.At this time, the wiring is completed, the plug is connected to the power supply and the switch lamp is turned on.
Fluorescent lamp zone price
The price of fluorescent lights is around 10 to 20 yuan.
The role of fluorescent lamp zone
The first is the energy saving effect: this device generally uses the frequency of 20 to 60 Hz to power the lamp.In this way, the corresponding light efficiency of the lamp can increase by about 10 % compared with the industrial frequency. It consumes a lower consumption, and the power of the lamp will decrease by 20 %, so energy saving is very good.The second is that this device has completely removed the flash, which promotes stable glow.This is of great benefit to the relatively improved visual resolution; at the same time, it can also help people to eliminate the fatigue of the eyes and protect the eyes when working for a long time.The third is that it has a reliable role of the starting point.This kind of device can preheat the lamp tube and light up at once.
Principle of fluorescence zone
After the corresponding fluorescent lamp is in the circuit, the two electrodes of the corresponding rosewer parts can be discharged light.This is actually the work that allows dual metal tablets to connect electricity through thermal expansion and contraction.When heated, it expands, so that it can be connected to the static tactile pole.After the connection is connected, the devices of the power and the ballast also have filaments and the corresponding rose.Generally, after the current is preheated, this time is 3 seconds. After that, the electrode of the gifted device will appear between the electrodes of the device.

Related tags： Machinery