The welded cable is actually a welded wire. It is a rubber insulation cable. It is mainly used in the secondary connection and edge welding machines and welding pliers of the welding machine.The main feature is that the voltage is low and the current is large.The materials outside the cable are mainly natural rubber or chlorine rubber mixture. Among them, the dendramus mixture has the effect of oil resistance, heat resistance and non -delay, and can be used for various occasions.
Welding machine cable manufacturer
1. Shanghai Qifan wire and cable Co., Ltd. 2. Hebei Huarun Cable Co., Ltd. 3. Anhui Tiankang (Group) Co., Ltd. 4. Hebei Yongqiang Cable Co., Ltd. 5, Xian East Asia wire and cable Industry Co., Ltd.
Welding machine and cable price
Because the welding machine is widely used in life, the price of the cable of the welding machine is also relatively stable. At present, the price of the welding machine and cable on the market ranges from 10 yuan to 12 yuan.Here, Xiaobian specially reminds everyone that when using, we must control the temperature of the cable of the welding machine. At present, the use temperature of the welding machine cable cannot exceed 50 °, and an accident is likely to occur once it exceeds 50 °.This device of the welding machine cable cannot be repaired, so its specific functions cannot be changed at will, and the factory is set.Generally, the arc welding machine is a main circuit and cold contactor, so when inserting the power of the fan or the contactor, you must insert it at the input power port of the device.Before each use, we have to check the protective lamp of the protector of the protective device or red. Red represents the power supply, and the green represents the voltage.The green light is on when the normal without welding, and it will be destroyed when welding. If the green light is destroyed when the green light is not welded, then the protection of the protector of the protector has failed. At this time, it should be immediately immediately.stop using.
Welding machine and cable specification
The length of the first power line of the welding machine should not exceed three meters in length, and the cross -sectional area can take the current density of 4-6A per square millimeter.You can take the rated currents of 30-50A, 60-80A, 100A, 120-150A, 200A, 360-400A, respectively 10 square millimeters, 16 square millimeters, 35 square millimeters, 50 square meters, 50 square meters of 360-400A, 360A, 300A, 360A, 360A, 360A, 360A, 360A, 360A, 360A, 360A, 360A, 360A, 360A.Millimeters, 75 square millimeters, 90 square millimeters.

Related tags： Machinery