The hydroxide machine uses electrolytic water technology to extract the energy equipment of hydrogen and oxygen gas from the water. Among them, hydrogen as a fuel, oxygen for combustion, can replace carbon -containing gases such as acetylene, gas, liquefied gas, with high heat value and concentrated flame concentration, Zero pollution, high production efficiency, and convenient energy saving and convenient.Because the machine uses IGBT inverter power supply, it can be used as electric welding at the same time, especially suitable for various comprehensive processing and maintenance places.
What are the characteristics of hydroxide machines
1. IGBT inverter power technology, pure DC low -voltage electrolytic, can be welded, oxygen and oxygen.
2. The electrolytic groove adopts an integrated design. The only end plates on both sides of the interface are connected by industrial -grade flanges, which completely solves the problem of leakage and leakage during thermal expansion and contraction of the electrolyte.
3. Electrolytic plate uses a unique nickel molybdenum sulfur alloy material with 316L stainless steel substrate.
4. The electrolyte uses potassium hydroxide and is configured with unique reagents. The electrolytic plate no longer adsorb impurities ions.
5. Use a unique electrolytic slot direct heat exchange technology (the worlds leading fourth -generation heat exchange technology) to ensure that the constant temperature of the electrolyte is about 80 degrees.
6. Integrated electrolytic power supply, small design, and built -in resistance absorption and AC power functions.
7, the amount of gas production can be adjusted as required, and the gas production is stable.
8. Multiple measuring instrument display and other intelligent controls are easy to consider for users.
9. Built -in precision filtering stainless steel pressure reducing valve, stable gas supply pressure and adjustment, changes in the pressure in the machine do not affect the flame changes of the gas equipment.
What to pay attention to when the hydroxide machine needs to be used
1. The power supply outside the machine is 380V of the three -phase and four -line line. Do not connect to the zero line to make the machine do not work. The lack of phase operation will damage the machine.
2. The working medium of hydroxide machine is pure water. Long -term use of tap water that has not been filtered may block the pipeline. It is recommended to use pure water to extend the service life of the machine.
3. The temperature of the working environment is 0-40C, and the ventilation is good, and it is forbidden to work in a closed environment.
4. This machine requires a good lightning protection effect, otherwise the power should be turned off during lightning.
5. It is strictly forbidden to rinse with water in the machine. It can only clean the dust in the machine with clean rags or compress the air.
6. When booting operations, no smoking or other fire sources are allowed within 5m by the machine.If the machine air outlet or other parts of the gas can be turned off immediately after the gas is on fire (it will be automatically extinguished when the remaining gas in the machine is burned).
7. There is a low concentration of potassium hydroxide (KOH) solution in the working medium of this machine. When accidentally splashing the human body, you should immediately wash with vinegar.Therefore, users should prepare a few bottles of vinegar at any time to prevent unexplained.
8. It is forbidden to use the IGBT inverter power supply overload. When the vehicle power supply is issued, the maximum current has been adjusted, and the user cannot change its maximum value at will.
9. Forbidden voltage is prohibited, excessive power supply power supply will directly damage the vehicle IGBT inverter DC power supply (usually normally used at 380V ± 10%).%.
10. After the power supply is used for a period of time, the machine will be automatically protected, then the current adjustment knob should be adjusted to the least. When the fan cools the power supply, it can work normally. However, Avoid overload again.
11. When the auxiliary water tank is low in water, the bee tweezers are continuously rang at the same time, prompting to add pure water (not an electrolyte) to the auxiliary water tank. At this timeuntil.
How to maintain and maintain hydroxide machine
1. Under normal circumstances, after use every six months, the electrolyte in the machine is put out to change the new solution.If the work is normal (no change in gas production), it is maintained once a year.Please refer to Chapter 14 for cleaning the fluid.
2. Regularly check whether the internal tube joint of the machine is loose or leaky.
Method: Just turn off the gas valve of the gas equipment or directly block the air outlet of the outlet of the rear panel to the pressure meter pointer to the overvoltage setting value. Generally, it is (0.19MPa). Whether it will fall down after 5 minutes.If so, the machine will have air leaks; if not, the machine will use it normally, and the phenomenon of leakage needs to be re -sealed.
3. Frequently use dry compressed air cleaning power and whole machine.
4. Check the switch of the solenoid valve in the machine regularly, that is, whether the water adding solenoid valve has a normal magnetic phenomenon when the water adding indicator light is on.

Related tags： Machinery