The stabilizer is a device with stable output voltage. When the input voltage or load change, the control circuit is sampled, compared, and enlarged, and then drives the servo motor to rotate to change the position of the pressure regulator carbon brush.Compare to keep the output voltage stable.How much is the household regulator? Is the voltage consumption of a large power consumption? Lets introduce it in detail below.
How much is the household regulator
The household regulator is generally used by TSD series.It mainly depends on whether to bring only one computer or all the load.If it is a computer, it is enough for a TSD-500VA.More than a hundred dollars, if you bring all the loads.It is best to equip 5000VA.About 600 yuan!
Home Volunteer Buy
1. Please make sure that the range and frequency of your 220V voltage jump, then buy the regulator.For example, if your home is pulled around 80V and the input range of your regulator is 140V-230V, it must not play the role you want.Therefore, the range of stabilizers should be selected as the power supply range of the use environment.It is recommended to choose a broadband regulator.
2. The rated power.Please make sure that the total power of the device you need to stabilize.When choosing a regulator, your regulator rated power is best higher, and the total power of all equipment is 30%.You need to know that the heat generated by the full load will increase the loss of components. If the overload is running, the required current is too large, and the voltage will inevitably be pulled down.
3. Automatic pressure regulation function and accuracy.Try to choose the automatic pressure regulating function when buying a stabilizer, although the price may be slightly higher.But it is more cost -effective than the economic loss brought by your machine.The old -fashioned regulator uses the principle of relay switching when voltage changes.At the moment of switching, the current will have slightly floating impact.Therefore, the higher the accuracy, the smaller the current impact.
4、购买稳压器的时候建议你要选购比实际功率大三倍的稳压器,因为稳压器在实际工作中要克服市电的浪涌冲击和感性负载的起动冲击(如冰箱、When the air conditioner, motor, and motor} When purchasing the pressure regulator, when selecting the contact automatic pressure regulator, the rated output pressure regulator should leave a larger amount than the transit automatic pressure regulator.The operation of the buttons, switching, etc. should be flexible and reliable. The parts should shake the parts without loosening the parts. There should be no rolling sounds in the machine, otherwise it means that there are foreign bodies in the machine.
5. Reasonably select the total output of the automatic pressure regulator, the total capacity = the total power of the household appliances × 3.The shape structure of the automatic pressure regulator includes several types of tablet, wall -hanging, dual -use and floor -to -ceiling type. You should choose different styles according to the location, main purpose, and installation capacity of the installation.
Is the stabilizer consume a large power consumption?
When the customer purchases the home regulator, they will start thinking about some problems. For example, will the electricity use the power after using the regulator?Everyone is more concerned about the issues that must be considered by the country and energy conservation work.So what is the power consumption of general household regulators? This problem is very curious and cared for, so lets analyze:
At present, several types of stabilizers on the market are generally low. The voltage voltage equipment of the TNS/D series is generally not more than 1%in the air load, and the load generally does not exceed 3-5%.The greater the more power, the higher the efficiency of the full load. The efficiency of SBW is more than 98%of the efficiency of more than 50kva high power type.However, inductive and oil immersion regulator loss is greater.
Therefore, whether the stabilizer consumes power, you ca n’t make it clear here. You still need to distinguish what model it is, but it is all low -power.

Related tags： Machinery