The anchor rod tension meter, the number of the anchor rods is a detection tool for determining the anchor anchoring power. It has a significant effect on the research of various anchor rods and the inspection of engineering quality.Digital -displayed anchoring rod is a detection tool for determining anchors anchoring power. It has a significant effect on the research of various anchor rods in the theory of anchor spraying support theory and the inspection of engineering quality.The main specifications are 5 tons, 10 tons, 20 tons, and 30 tons.It is widely used in a variety of tunnel operations such as coal, national defense, tunnel and transportation.
Operating procedures for the anchor rod tide meter
1. Check the amount of oil: If the hydraulic cylinder piston does not completely shrink back to the cylinder body, first connect to the hand pressure pump through the oil pipe, and loosen the unloading valve on the pump body counterclockwise to discharge the hydraulic oil in the jack top.Go to the oil storage tube of the hand -pressed pump.Second, exhaust: After the hydraulic system is assembled, air storage cylinders, oil pipes and hydraulic cylinders are often mixed with air. To make the hydraulic system normally, these air must be discharged.The method is to put the manual pump in a slightly higher place than the hydraulic cylinder, press the manual pump, make the hydraulic oil cylinder piston extend, and then open the load -unloading valve to shrink the piston back.If necessary, you can open the oil injection valve to exclude the air in the oil storage cylinder.Third, connect the oil pipe with the jack, and check the oil, exhaust and pressure gauge according to the requirements of the above and two items.Press the oil pump handle, should be uniform, do not excessively force. When the reading on the pressure gauge meets the requirements, stop pressing pressure.Note that the manual pump must be placed horizontally.After the detection, the leakage valve should be loosened counterclockwise, so that the readings of the pressure gauge should be zero, and then the components are removed from the anchor rod.
Anchor stroke tabk model
The common models of hollow grouting anchor rod are generally: 25mm, 28mm, 32mm.The common models of T -type hollow anchor rods (tube sheds) are generally: 51mm, 76mm, 108mm.Common models of combined anchor rods are generally: 22mm, 25mm.The common models of mortar anchors are generally: 22mm.The above specifications are directly anchoring the outer diameter.
Anchor stroke pipeline manufacturer
Zoucheng Taikun Industry and Mining Equipment Co., Ltd.: This company is located in Shandong Province. After so many years of development, some cross -films have been formed by coal mines, metal mines, etc. Because it uses a new operation of cross -industry operationsTherefore, its products can be sold to all parts of the country. Now there are more than 200 companies and 30 senior managers. All engineers have been signed by the school.The reliable service has won the market recognition.Jining CIMC Industry and Mining Co., Ltd. Machinery Manufacturing Factory: This company is located in the Mechanical and Electrical Industry Park in High -tech Zone, Jining City, Shandong Province.Design, production, processing and marketing is a high -tech company, and the company also has a lot of coal science design schools with high cooperation contacts. It is entirely based on the needs of the market. This company has a very perfect one.The technology team and a group of experienced managers have created the companys excellent product quality after decades of struggle, and also won the vast market.
Anchor rod tension price
Anchor rod tension price: 5500 yuan brand: NI model: SW-100/200/300/500 Item number: SW-100/200/300/500 color classification: 100T50T30T20T10T decoration and construction contentThe peak number table is prohibited from exceeding the maximum range.The system should be kept clean, and the dust should be wiped before connecting the oil pipe to the oil pipe.The bottom of the oil cylinder should be settled and stable at the bottom of the oil, and it should be straight with the measured anchor rod.The high -pressure rubber tube should perform pressure resistance once a year to prevent accidental accidents.

Related tags： Machinery