The collector ring is also called conductive ring, slide ring, set flow ring, flow ring, etc.It can be used in the electromechanical system that requires continuous rotation, but also needs to transmit power and signals from a fixed position to the rotating position.Slippers can improve system performance, simplify the system structure, and avoid sprains during rotation.
Rag manufacturer
Cangzhou Yoneng Electric Electric Equipment Co., Ltd.: Professional manufacturers who produce various electricals. The company is located in the Dongguang Industrial Economic Development Zone. It is close to the Beijing -Shanghai Railway.Synchronous motors and asynchronous motors of the collector rings are used in electrical engines, which are widely used in the industrial sector, and most of them operate under various harsh conditions.In particular, from the perspective of electric brush materials, the combatant ring brushes not only use graphite brushes, but also in order to increase the current density of the brush, and sometimes use metal graphite brushes. Therefore, it is necessary to consider factors such as abnormal residual expansion.The material of the new motor set electrical ring requires large mechanical strength and is a good conductor of electricity. It also must also have corrosion resistance. When sliding with the brush, it must have wear resistance and stable sliding contact characteristics.Shenzhen Jingpei Electronics Co., Ltd.: The company is committed to research and development and production of high -quality various types of slippery rings, and strives to provide high reliability for industrial control in various fields that can optimize system design and improve system performance.With its strong research and development strength, many years of development and production experience, and close cooperation with famous foreign manufacturers, not only can provide universal industrial conductivity skating rings, but also specially designed specific specifications according to customer requirements.Its LPK series disk slide rings are designed for highly limited rotation systems in the vertical direction; this series is divided into two types: integrated plate slide rings and isolation plate -type slide ring.Solid and different sizes are rotated by pores. The separated plate -type slide ring provides separate rotors and customized and combined with the PCB version.
Collecting loop model
Principle
The working principle of the collector ring rely on the principle of elasticity, the principle of rolling overlapping, or the principle of sealing, as well as the design of the clever motion structure and the design of precise parts, and the reasonable selection of materials, etc., which constitute a stable and reliable material selection.The rotation connecting system.The rotor of Jingpei Electronics engineers based on the working principle of the collector ring is a series of silver slip rings that are tightly set on the rotating shaft.The series is equipped with a tight spring brush.During the measurement, first use the coupling to connect the collector on the shaft, so that the rotor of the electrical ring can rotate with the shaft, fix the stator and closely contact the rotor.Then connect the strain film and rotor with a wire, connect the test circuit to the stator, and closely fit the brush and the slide ring for transmission of the strain signal.The structure of the collector is simple, sturdy, and low in cost.The main disadvantage is that when the measured components run at high speed, the contact resistance is large and unstable.
Ring Ring Ring Road
1. The setting ring is also called electrical ring, sliding ring, power collecting ring, flow ring, etc. It can be used in the electromechanical system that requires the rotation of the rotation to transmit the power box signal from a fixed position to the rotating position.The collector ring can improve the performance of the system, simplify the system structure, and avoid sprains caused by the wire during rotation.2. The collector ring is generally used on the directioner of the motor. As a sliding contact body that exports the import current, its conductivity, thermal conductivity and lubrication performance are good, and it has a certain mechanical strength and directional spark.Almost all motors use Jingpei Ring, which is an important organizational component of the motor.The collector ring is widely applicable to various DC generators, synchronous motors, battery DC motors, crane motors, and various electric welding machines.3. Synchronous motors, which includes low -speed water wheel generators, are widely used.For car generators, it mainly emphasizes the mechanical strength and abrasion -resistant collecting ring at high circular speed, and sometimes uses forging steel.In addition, when it is required to resist corrosion resistance, stainless steel can be used, but the sliding characteristics of stainless steel are unstable, and the combination of the brush is not appropriate. It often makes the brush beating, which can easily cause the brush temperature to rise too high or abnormally wear abnormally.Pay attention.

Related tags： Machinery