Several things to get on the car, adjust the seats, headrests, rearview mirrors, etc. The headrest is the easiest to be ignored. If the car headrest is not adjusted, what harm would it be?Lets take a look with Xiaobian below!
How to remove the car pillow
1. Due to the model, the roof of some vehicles will be relatively short. When disassembling the headrest, it is very likely that the head pillow will hold the ceiling. Therefore, the first step is to adjust the seat back toEssence
2. Find the button to dismantle the headrest and press it.Note: If the seat sleeve affects the pillow for dismantling the head pillow, first remove the seat cover of the head pillow.
3. After holding down, pull out the head pillow to remove it.Note: The headrests of most models can be disassembled in this way. Individual models may not be applicable. Please read the users user manual in detail for specific disassembly methods.
Improper adjustment of damage
Statistics show that 70 % of the personal injury caused by traffic accidents belong to cervical spine injuries, and the rear -end impact accident is the greatest culprit to cause cervical injury.In the rear -end accident, when the human body suddenly moves forward or back, the head is usually unable to keep up with the bodys exercise., Resulting in cervical injury.If the height of the headrest is inappropriate, the cervical injury will even become fatal injuries. It can be seen that the height of the headrest is not only related to comfort.Before understanding the adjustment of car headrests, lets take a look at the serious consequences of incorrect height of the headrest.
The heteropathy is too high: cannot buffer head impact
Some car owners or passengers like to raise the headrest and make the height of the headrest higher than the head. It is said that this adjustment can give the head a sense of protection from top to bottom.In fact, this so -called sense of protection is just an illusion.The softest part of the headrest is in the middle, and the height of the headrest is too high. The back of the head can only contact the lower part of the head pillow.
The height of the headrest is too low: it is easy to cause the cervical spine to break
Some car owners or passengers like to minimize the headrest and use the headrest as the neck pillow. It is believed that the energy regulation can better support the neck and avoid fatigue.The height adjustment of the headrest is too low, and the consequences will be more serious: when the vehicle is impacted, the head will hit the headrest in an instantaneous reverseness due to inertia. Due to the low height of the headrest, the neck will hit the head in a whipping state.Pillow, causing a fatal injury to break the cervical spine.
How to increase the car headrest
1. Adjust the angle of the seat to make the back as upright as possible
Before adjusting the height of the headrest, what we have to do is to adjust the angle of the back of the seat.We know that the human body where the headrest and the back are in contact with the back are the head and neck and the back, and the angle between the head and neck and the body, the more slower the degree of injury to the occupant when the vehicle is hit.It should be noted here that the corner of the seat back is not as straight and better, and you should try to lean slightly as much as possible.
2. The height of the headrest should be flat with the head
As mentioned above, the softest and most protected part of the headrest is in the middle of the headrest.Therefore, the height of the headrest should be adjusted to the flatness of the head, or the soft parts in the middle of the head pillow are parallel to the upper edges of the ears. When the vehicle is severely hit, the headrest can effectively protect the head and cervical spine.
3. The distance between the back brain and the headrest should be as small as possible as possible
From a physical perspective, the smaller the distance between the rear brain and the headrest when the car is hit, the greater the buffer effect of the headrest on the head and neck.This spacing should not exceed 4 cm, which is equivalent to the width of the two fingers.In addition, we can also install a neck pillow on the seat to strengthen the protective effect of the seat.
4. After the height of the headrest is adjusted, it depends on whether the plug -in and marketing card position is stable
After the above steps are adjusted to adjust the seat angle and the height of the headrest, the headrest should be fixed in the corresponding height card position, so that the headrest is not shaken, and the length of the two plug -in and insertion is equal.
5. Women should adjust the height of the headrest, and try to lean forward as much as possible
In a vehicle collision accident, women are 1.8 ~ 2.2 times higher than the probability of a mans head and neck injury.Therefore, women should pay more attention to adjusting the height of the car pillow, and try to lean forward as much as possible.
6. It is best to install headrests in the car chair in the car
At present, most of the common headrest fabrics on the market are made of high -grade silk, fluffy or cotton, and are filled with fluffy cotton.It is recommended to choose elastic and comfortable products when buying a headrest.In addition, some inferior headrests are filled with "black heart cotton", which is harmful to human health.
Car pillows are not just to create a sense of comfort. In emergency situations, the key protection role in the car in the car is the value of the car headrest.Therefore, in the process of daily car use, we should pay attention to the adjustment of the height of the headrest, so that the headrests will be the device that protects us, and dont just care about whether the headrest makes ourselves comfortable.

Related tags： Auto Accessories