The car navigator can be said to be portable navigation of large screen.The high -definition screen allows the owner to enjoy the visual impact during his free time, and the upgraded sound quality effect makes the owner fascinated.If you have a car, the preferred entertainment facility on the car is the car navigator.The following article introduces us the relevant knowledge of the car navigator!
Car DVD navigation installation tutorial
1. The original car effect below.2. The technician uses a rubber knife to pry open the outer frame of the panel in the lower right corner of the outer frame of the central control panel.3. Then slowly pry open from top to bottom.4. Then it was turn to the upper left corner.5. The panel frame is loose and took it out.6. Since the back of the outer frame is connected, the line beam must be pulled out first.First unplug the fog light switch line on the right.7. Then unplug the fog light switch line on the left.8. Unplug the air -conditioning wind speed control line.9. Unplug the air conditioning control line.10. After taking away the original car effect of the central control panel frame, I clearly see the original car audio host.11. After the outer frame is removed, the original car host must be removed. First, remove the screws on the four corners of the original host.12. Take out the host and unplug the power cord on the back panel of the host.13. Then unplug the radio antenna of the original car host.14. After the host is taken out of the central control, the original cars center console effect.15. Take out our NIO/Ni new console.16. After connecting the dedicated lines equipped by the original car and NIO/Nio, the dedicated line is connected to the corresponding position of the new hosts back panel.17. Each line of the wiring beam has a detailed explanation, which can be completely connected in less than two minutes.18. Looking at it from another angle, it is very simple! It will be done without much effort.19. Embeds the new host of the connected line into the center console.20. Turn on the test first; start the new host, Hondas logo (40 different boot screen selection) appears, which is very original.21. Then come to the precautions screen (reminding the owner of the owner to pay attention to what should be paid attention to).22. After the test of the technicians, NIO/Ni often; then install the original car frame.23. Place the outer frame.24. After installing the outer frame back, test whether the button on the outer frame works normally.25. After the inspection, the entire installation process is basically completed! Then, the main functions of the new host are tested.Restart the new host, the following is the precautions interface.26. Select the "NAVI" button of the host panel and immediately switch to the GPS navigation system. The picture below is the picture after entering the navigation system to display the current position where you are, and you can set the functions such as destinations.27. In order to upgrade the effect of the flying console, you can see the video playback, multi -disc loser control, radio, rear seat entertainment, navigation system, auxiliary input (under the "setting" of the iPod function in "Settings), etc.The functions of the wait have been built into this NIO/Niou GPS audio -visual navigation all -in -one.
Precautions for car DVD navigation
When disassembling this car, disassemble the panel and the instrument box together. Note that there are two screws above the steering wheel instrument. There is a screw of the tobacco box under the host.There are also two screws at the table with a panel. You can see the timetable. Be careful not to break the plastic buckle and protect the panel when disassembling the panel;The air conditioning control line is under the host; because there are many sockets behind this car panel, pay attention to the inserted perippine when installing the panel.
How to maintain maintenance and maintenance of car DVD navigation
1. Do not let the navigation screen contact sharp objects.
2. After use, follow the order of shutdown: close the page first, then shut down, and finally unplug the plug.Some car owner pictures are convenient, and the plug is pulled directly after use. It never shuts down.
3. It is best to charge for about 10 hours in the first three times, so that the battery power storage capacity is maximized.
4. Move the car first, and then insert some cigarettes.After the navigation is over, unplug the cigarette lighter, and then insert it after the car is launched next time. This will help protect the machine battery and extend the service life of the battery.
5. Do not put a portable navigation in the sun for a long time. The larger temperature difference not only affects the battery life of the navigation, but also affects the touch sensitivity of the LCD screen.
6. It is best to put it away after use. Do not put it in a conspicuous position on the car, so as not to provoke the thief.

Related tags： Auto Accessories