In recent years, the quality of the car explosion -proof membrane is uneven, and there will be various problems. In response to the problems that occur after these films, I asked the experts in this area to analyze them.When buying explosion -proof membranes, make some professional reminders, so that everyone can spend the hot summer with peace of mind.
Seven most common problems in automotive explosion -proof membrane
In recent years, the quality of the car explosion -proof membrane is uneven, and there will be various problems. In response to the problems that occur after these films, I asked the experts in this area to analyze them.When buying explosion -proof membranes, make some professional reminders, so that everyone can spend the hot summer with peace of mind.The explosion -proof membrane mainly has the following problems:
Symptoms 1. The corner of the side window after the film will wrinkle
Specific performance: In the short term after the film, the side window was found to be wrinkled.Reason: First, the explosion -proof membrane has the quality problem of itself, and the other is that the process in the construction process is not close.Expert tips: If the quality of the membrane is poor, it may be a bad explosion -proof film presented by the store, which is the case.
Symptoms 2. Not too capable of heat insulation and glass hot
Specific performance: Direct the sun, the heat insulation effect is not good.After turning on the air conditioner, it is still sultry, and the glass has some hotness.Reason: Mainly the quality of the film.Expert tips: Referring insulation is one of the main functions of explosion -proof membrane.Both explosion -proof membranes with better quality are generally both reflected and absorbing both.In contrast, the inferior membrane is saving costs, and a large amount of absorbent absorption will be adopted. In this way, the heat will be absorbed on the glass, causing the inside of the car to be stuffy and the glass surface is hot.It is worth noting that this membrane absorption heat can even lead to a glass explosion over time.Therefore, when buying, the owner must understand which type of heat absorption is provided by the other party.
Symptoms II
Reason: It is likely to choose the phenomenon that affects the visual phenomenon.Expert tips: The clarity of the membrane is mainly related to the manufacturing process of the membrane and the glue used.At present, the chromosomal membrane on the market is the lowest, and the evaporation coating is second, and the definition is better.Therefore, when choosing a membrane, be sure to distinguish it carefully. The film with too strong reflection is usually not ideal.
Symptoms 4. Fack of membranes, foaming or color mottled
Reason: In this case, the chromosomal membrane that is resistant to a large extent is to a large extent.This film cannot be seen in a short period of time.But after a long time, under the sun exposure, it produces photosynthesis and thermal effects, which is easy to decompose, aging, fade, and foam.In addition, it is easy to reflect light, which is the driver to produce a visual fatigue.Whats more, plastic staining membranes also contain harmful substances such as formaldehyde and benzene, which affects the health of the owner.Expert tips: It is recommended to choose and construct a regular authorized store in major explosion -proof membrane brands.
Symptoms V. Glass edge film automatically raised
Specific performance: After a few days of the film, the edge of the glass was raised.Reasons: Mainly the reasons for construction.Because some models have too large glass curves, if you do not pay attention during construction, it will cause the film to roll up after a few days; at the same time, because the glass curved surface is too large, there may be air bubbles in the scheduled edge., Affairs occurs.Expert tips: In response to this situation, the construction matters are squeezed at the outer edge with a soft cloth to prevent it from being lifted after a few days. At the same time, if the steel plate is scraped and heated, the effect will be ideal.
Symptoms 6. The original car glass burst
Specific performance: One week after the film, the original car glass burst.Reason: or the technical method is not mastered during construction, or the quality of the glass itself has problems.Expert tips: Due to the large curved surface, the glass of some models has high technical requirements for the film.Therefore, if the construction technology is not closed, it may cause glass burst when the temperature difference between inside and outside is too large.To deal with this "easily injured" glass, it is best to use dry roasting method to avoid the glass when it is set to avoid the glass.If the correct method has been adopted during construction, the glass is still exploded, which is the quality problem of the glass itself.
Symptoms Seven, the original car remote control of the original car after the film
Specific performance: After the film, the door was closed that night and found that the remote control of the original car failed, and it could not be locked.Reason: In theory, after general vehicle films, it will not affect the normal work of the original car controller.However, according to the car owners screening, this phenomenon usually occurs after the film, and it is estimated that problems occur during construction.If the original car controller is dismantled, it is found that there is a water droplet inside, then it is largely due to accidental construction, which causes failure due to accidental construction.Expert tips: This shows the importance of standardizing construction.Therefore, how the other party ’s construction environment is also required by the owner.

Related tags： Auto Accessories