The gate is also known as a car block. It was originally introduced from abroad. The English name is BarrierGate. It is a channel entry and exit management equipment specifically used on the road to limit motor vehicles.Manage the vehicles entry and exit.The electric channel can be achieved through the wireless remote control alone. It can also implement the automatic management status through the parking lot management system (ie, the IC card swiping management system), and take the card to release the vehicle. When the parking fee is charged, the vehicle is automatically released after the parking fee.
Standard vehicle installation standard
1. Standard for setting up a rod type of car gear: 1. Put 3 steel wire ropes into 3 steel pipes.2. The steel wire rope must be fixed with a dedicated base.3. The steel wire rope head of the car should be passed through the rope hole of the base, and the bolt of the base should be fixed.One rope card is used in the middle of each two wire rope.4. Do not be less than 30 meters away from the barrier and the barrack.5. The height after installing the rod should be about 1.2 meters away from the ground.6. The height of the car gear is about 2.2 meters away from the ground.7. After the vehicle is settled, you need to adjust the hitting rod.Second, the standard of the tongue -type car gear setting: 1. The base of the car gear should be fixed with the track.2. If the car gear is turned on, the height of the tongue must not be lower than 25cm.3. If the car gear is closed, the height of the tongue cannot affect the smooth passing of the car.
Principles
The working principle of the car gear is that when the vehicles impact slows rubber sheet, when the power of the left and right brands of the support of the branch is transmitted to the brake rail, the spring seat, the brake rail can generate a large friction resistance with the basic rail to stop the vehicle stoppedSetting, and then installed in the brake rails of the main frame in the braking track. Due to the pressure of pressure, the friction when braking is greatly increased. When dynamic, it can continue to work.The main frame can make the car gear drive forward. The two pairs of brake rails and two pairs of devices in the back start gliding. The resistance of friction slowly increases.At the same time, the resistance of the car gear can become larger.
Height
15mm-300mm is the general height of the car gear. This is on the platform. When the car gear is at the ramp, it must intercept 2/3 of the altitude of the mining car.
Retarder repair
The faults of the car gear are different, and the causes of the causes are different. There are also differences during maintenance. Targeted maintenance can be loosened by parts in the process of using the car that can be fixed to the correct position during maintenance, such as coils, such as coils, such as coils.The loosening problem of buried threads.For the wear and damage of the parts, it is to test the parts that occur in time, and then replace it. For example, if the chassis is abnormal, you can use lubricating oil or replacement of the bearings.
Carrier price
The price of the car gear has a great correlation with the type: the price of the rubber car gear generally does not exceed 5,000 yuan, all around 3,000 yuan.The price of a stone -like car carrier is 10,000 yuan.The price of a new type of vehicle is generally between 15000 and 2000,000.

Related tags： Auto Accessories