Now more and more car owners choose to put a car glass film on their own car, and the car glass film has been used for a long time. The glass film is easy to start one by one. At this time, the car glass film needs to be replaced.Because most car glass film stickers are relatively tight, the risk of tearing off the glass film is greater. Unjustly may cause glass damage and affect the shape of the vehicle.
What are the steps of the car glass film?
All the window films must be removed slowly over time. The two signs of aging of the film are purple and bubbles.The non -metallic dye in the film is decomposed and discolored, thus forming a purple film.As for the foam, it is caused by the loss of the adhesive to the window to the window.After a bubble appears, more bubbles will be produced.If you try to tear off your film, the glass window may be attached to a layer of sticky residues. It takes several hours to scrape it. At this time, the car glass film should be removed and the membrane is restarted.There are several steps for tearing off the glass film:
1. Use a wallpaper knife to tear a mouth open in which part.
2. Tear the car glass film with bare hands, and use appropriate strength to try not to break the membrane.
3. Use a knife when you encounter a bad place until you finish all.
4. Remove glue.Many glue will remain on the glass, and it needs to be removed by rubber, scraper, and rags.
5. Dry.After the membrane is torn, there will be some odor, and the storm can be removed.
Precautions for car glass film removal
Skill:
1. When removing the film near the degraded line, pull up the film with a buk tape. Do not scrape it with a blade.If you have viscous residues, you can use ammonia or Windex cleaner and old towels.
2. When scraping the film with a blade, the blade may become blunt.You may need to use a few blades to scrape them.
3. You can also use heating lights or pan -light lights (such as a 500 -watt lamp) to heat the film.Put the lights from 30 to 45 cm away from the window.When using the lamp to heat the film, spray ammonia water, keep the film wet, and cover the plastic film.Heat for 30 to 45 minutes and strip the car film as much as possible.Residual adhesives can usually be scraped off with non -carbon steel blades, spraying warm soapy water during the scraping process to maintain humidity.
Notice:
1. Do not use the blade to scramble the dehumidarian line, and scrape it along the texture.Even if you just wipe the fog line with a towel across the fog, it will remove the conductor and make them unable to play a role.
2. Be careful to use a shaved blade to avoid cutting yourself or scraping the window.
3. You may permanently damage the degradation line of the rear window glass, or it may damage the radio antenna made of the same material.If you damage the dehomatic line, you can repair them with conductive coatings.Although it is difficult, it is not impossible.
How long does it take to replace the car glass film
1. Different films shelf life is different. Genuine car film can be warranty for 6-10 years. The environmental conditions of the wind blowing sun and sun exposure will accelerate the aging of the film, resulting in the fading of the car film and the decline in various indicators.
2. In the first place, if you find that the window is foaming and the membrane is cracked or wrinkled, then these membranes need to be replaced.
3. The removal of the car film is still very strenuous. The effect of tearing off will not be too ideal, so it is recommended that the owner go to the special car film store for disassembly.
4. If you want to work hard when you replace the car film, it is best to buy the brands car film and a powerful store to install it before buying the car film.goods.

Related tags： Auto Accessories