Cars are now one of the tools for our travel. For many people, they depend on cars.
How to use automatic transmission cars
Car is now one of the tools for our travel. For many people, they are more and more dependent on cars. Then you know the use of cars? The following will be introduced to you to introduce the use of automatic transmission.China
Use of automatic files 1. When the engine starts, the 凐 Auto gearbox has also limited the gear. Create this is the adjustment of the manufacturers adjustment of the gearbox out of the safe consideration.速 Generally, only when the gear bar is in the position of the gear P or N, the engine can be started.If the gear rod is driving the gear, phoenix, such as D and R, the engine cannot start.The purpose of this limit is to prevent cars from colliding with the front and rear objects.不 If the novice cannot start the engine, the robbery should check if the wrong file is hung up first.If it is not P or N gear, 凊 should be adjusted first, and then start the car again;
2. Use N gear to start: When your vehicle is launched, when you drive forward without reversing and drive forward, you can connect the power first, step on the brakes and push the gearsAfter hanging into the D gear, you can go forward directly. This can avoid the punishment after the P file is ignited.When ensuring safety, quickly push the gear to the N gear to fire before starting the engine;
3. When the car is started, you only have to step down the brake pedal. You can remove the transmission rod out of the P or N gear and replace it with the driving gear.When the pine opens the brake pedal, the car can slowly drive.The reason why I stepped on the brakes in advance was to go to the safety of drivers and cars.Otherwise, after the engine starts, the cold car will move up, and the cold car will move. At this time, if the driver does not respond enough, it is easy to collide;
4. You can switch forward gear freely during driving.Although these gears are limited to the highest gear that can be reached, 凔 but as long as the gear and speed match, 刎 can be freely switched;
5. Do not hang the N gear when cutting during driving.The temperature rises, and the causes completely damage! In addition, the high -speed empty sliding is also very dangerous, and it is not fuel efficient.止 Sloping at low speed until stopping can be hung into the N gear in advance, it has no effect on it;
6. Do not push the P file during the vehicle driving process, 刖 unless you dont want the car anymore.向 When you need to change the direction of driving, 刞 Be sure to wait for the vehicle to stop and then switch gears;
7. Because there is a hydraulic transmission mechanism in the automatic transmission, and the liquid flow has a certain inertia, the 凓 cannot suddenly change. Therefore, it is best to hung into the reverse gear after the car stops.Before the vehicle stops completely, Jing absolutely prohibits the transmission rod from hanging into the P file.After the letter is parking, the 熄 must be touched into the P file to draw the key.Many people are used to stopping and pushing it directly to the P gear before turning off.Careful people will find this operation. After the fire is turned off, the general vehicle moves a small move before and after the pavement. At this time, there is a bite device in the P gear gearbox.A little impact on the gear gear! The correct approach should be: After the car enters the parking position, step on the brakes and pull the stall rod to N gear, pull up the handbrake, open the foot brake and then turn off the brake, and finally put the stall lever again.Push into the P file! Of course, this is also the protection of the gearboxs excellence;
8. Parking for a long time must be used by hand brakes, otherwise it will destroy the lock mechanism of the automatic transmission.The difference between 档 P and N gear is that there is a gear bite in the gear in the transmission when deleting the P gear.凪 凪 凪 ， ， ， alone rely on the handbrake to brake it! Especially to park in a place with a slope, it should be the same;
9. When the red light, Kai should use N gear or D gear.With a one -way clutch reaction wheel, the effect is to amplify the torque from the engine crankshaft. It will not rotate at the engine idle, and it will only need to work when the engine speed rises.车 Therefore, it doesnt matter if you step on the brakes and other red lights, it is okay to hang a handbrake to the N -pull handbrake.刏 Generally speaking, if you park for more than half a minute, you can hang the N -handle brake, and if the parking time is short, then step on the brakes.
I hope the above introduction will be helpful to you.
Please indicate the source in China

Related tags： Auto Accessories