The temperature of the road surface in summer is often as high as 70 ° C. Cars driving on this pavement for a long time may occur in the problem of explosive tires or abrasion due to high damage or tire pressure.
Summer car tire protection method
The temperature of the road surface in summer is often as high as 70 ° C. Cars driving on this pavement for a long time may occur in the problem of explosive tires or abrasion due to high damage or tire pressure.Affected by temperature, the gas in the tire will swell, and the tire pressure will rise from 2.3 kilograms to 3 kg. In order to ensure the pressure of the tire, it is recommended to replenish nitrogen in summer and reduce the air pressure by about 10%.Also check the tire pressure once a month. It is best to be before the car was started in the morning, because the tires need to be settled for 4 hours after driving.If the tire pressure is high, put some gas until the tires air pressure is in line with the standard tire pressure.
1. Be careful to prevent excessive use
After driving in summer, you should cool the tires in a cool place after driving for a while.When driving at noon, the speed should be appropriately reduced.Pay attention to the bearing capacity of the tire, do not overload it.This can keep the tire pressure on normal and not excessive use.The method of preventing excessive use is often replaced regularly after a certain period of time, so that the four -wheeled wear is balanced.
2. It is especially important to prevent explosive tires
The accident caused by the tire in summer is still high in highway accidents.The tires are worn severe, causing too thin the carcass, and the interior of the tire is constantly fever. At this time, it is easy to be punctured by the object. In addition, the weather is overheating in summer, which is likely to explode the tire.However, in addition, the tire burst is also related to several factors below.
3. Tire can be upgraded appropriately
The use of tires set by general manufacturers is between 80,000 and 100,000 kilometers (or about 5 years), but the specific situation must be determined according to the driving of the owner. ThereforeIf the tire wear is too large, you should consider replacing the tire to ensure safe driving.When replacing the tire, it is certainly good to use the original tire, but the appropriate upgrade may have a better effect.
There are about two ways to upgrade.Quality upgrades: Maintain the specifications of the original supporting tires, but switch to higher tires to improve the quality of the tires, such as more beautiful tire patterns, better drainability, smaller rolling noise or stronger grasping grabbingEarth strength and so on.Specifications upgrade: Within the license scope, the specifications of the original tires are upgraded upwards, that is, increase the tire specifications.In addition to improving the grip, the purpose of this approach can also make the vehicle after the tire change look more beautiful and mighty.Usually, while the specifications are upgraded, the quality is also upgraded.

Related tags： Auto Accessories