It is important to have some simple maintenance at this time for a long time. At this time, it is important to perform some simple maintenance.Do you know how to remove the faucet of the shower water?
How to disassemble the faucet of shower water
It is important to have some simple maintenance at this time for a long time. At this time, it is important to perform some simple maintenance.Do you know how to disassemble the faucet of the shower water? How much do you know about the maintenance method of the faucet of the shower water? Today, I will tell you about these two issues.
How to disassemble the faucet of shower water
Method 1: First, close the total water valve, and then have a red and blue mark of about 8 mm on the faucet. Ded it down, loosen the fixed screw with a screwdriver with a screwdriver, take the handle, remove the water faucet with a live wrench,The valve core, open the upper cover with a wrench, remove the ceramic valve core inside.
Method two: First close the total water valve. You can use a screwdriver to insert it under the faucet handle, pry the left and right upward, and pry it at the same time. Come slowly and evenly and stable, so that you can remove the valve core.
Method 3: First turn off the total water valve, unscrew the blue lid on the right handle, loosen the screw inside with a cross screw knife, take off the handle, and expose the valve core, and then use the activity wrench to twist the valve core.
Shower water faucet repair method
Maintenance skills that do not produce water, or the amount of water is too small
If the faucet does not produce water, or the amount of water is too small, it may be because there are some debris or a scale block the filter. If you encounter this situation, the maintenance skills are:Put the water faucet, it should be fine.
Loose maintenance techniques of the handle of the faucet
If the handle of the faucet is loose, it may be because it is too great during installation. The screws of the handle are not tightened. If this situation is encountered, the maintenance skills are: you can tighten the screws with your hand.Screws are fixed.This method is simple.
Maintenance skills of water leaking water
If the faucet cannot be completely closed, that is, it will leak water after turning off the faucet. It may be because there are hard miscellaneous objects stuck in secret sealing.Take out the debris and clean up the debris around the valve core, and then install it according to the original, which can generally solve the problem.Of course, if it is just a little bit of water, this is normal. As long as the duration is not long, there is no need to repair it.
Solid head has noise maintenance skills
If there is no noise in the faucet, it may be because the water pressure is too high, the hot and cold water pipe is not fixed, or there are obstacles or scale in the water inlet pipe.In case of this situation, the maintenance skills are: first reduce the hydraulic pressure. If not, check the water pipe and water heater, etc. If there is no connection, if there is, install it again.If the problem has not been resolved.Thats because there are obstacles or scale in the water inlet pipe, at this time, you need to clean up the debris or scale.
The above editor introduced the maintenance method of the faucet of the shower water, and also taught everyone how to remove the faucet of the shower water.If you want to repair the faucet of the shower water by yourself, you can try it according to the method of teaching above.

Related tags： news