The pneumatic connector is a fast connector widely used in air configuration and pneumatic tools. It can achieve pipeline connection or disconnected joint without any tools.It is mainly suitable for the connection of various pneumatic tools such as air compressor, pilot screwdriver, impact wrench, air pipeline, grinding machine, air diamond, etc.
How to use pneumatic joints
First and open -ending of open -ended pneumatic joints: First of all, when it is a link, insert the sub -body into the mothers body, and the sleeve will be pushed to the previous position under the action of the spring pressure, resulting in the tightness of the steel balls.The fluid will flow, and the O -type circle inside plays the role of placing liquid leakage.When it is not linked, the circle on the mothers body will be pushed to the other end, and the steel balls will roll out automatically. In this case, the sub -body will be moved out. Because the sub -body and the mother body are both, the mother body bothWithout a valve, the fluid inside will flow outward.Second, the usage of a single -road open -closed pneumatic connector: First of all, when it is about its link, insert the sub -body on one side of the mothers body. At this time, the valve is opened, and the fluid will naturally flow out.Further cushion will be pushed back to the original position under the power of the spring. At this time, the stainless steel balls will automatically lock to ensure that the sub -body and the mother are connected.Leakage.Without linking, when the sleeve on the mother moves to the other end, the stainless steel balls will automatically roll outward, and the sub -body will be bombed under the reaction force of the spring. At this timeIt will automatically close, thereby blocking the flow of the fluid.Third, the use of open and closed pneumatic joints at both ends: When not linking, the rot of the mother on the other end is rolled out of the stainless steel beads.Under the condition of force, it is automatically disconnected, so that the valves of the sub -body and the mother will be closed, and the flow of fluid will be blocked quickly.In the case of links, insert the sub -body into the mother, the role of the spring will push the sleeve to the original position, and at the same time, the roller will be automatically locked, so as to connect to the precision of the child. At this time, the sub -body and the mother body willThe valve will open under the role of mutual promotion, and the fluid circulates, and the O -type circle begins to work to completely block the leakage of the fluid.
Pneumatic joint price
1. Pneumatic C -type fast connector SP20 mother with 8*5 pneumorbone fast interpolation dynamic connecting PU pipe joint SP30/401.5 yuan 2. Pneumatic connector mpm partition fast inserting connection PM4/8/10/12/16 Cunning fast connector2.5 yuan 3.5 yuan 3. Taiwan Titan H-606 high-pressure dust gun blow gun, plastic gas, air gun, empty rifle joint 7 yuan
Pneumatic joint specification
The specifications of the pneumatic joints are 1/8 inch, 2 points are 1/4 inches, 3/8 inches, 4 points are 1/2 inches, 6 points are 3/4 inches, 8 points are 1 inch, etc.EssenceThe specifications of aerodynamic streets are not the same according to different specifications of the brand. The general target of mainland Taiwan is a bit, the European international standard target is inch, as well as Japanese standards. Now the market is basically these three specifications.

Related tags： news