Lightweight wall plate is a new type of energy -saving wall material. It is a wall material that looks like hollow flooring, but there is a male and female groove on both sides.After a small amount of mortar mortar, you can assemble it.It is composed of a variety of industrial waste residue such as harmless phospholosypsum, light steel residue, and powder ash, and is constructed by frequency -frequency steam pressure.Lightweight wall panels have the advantages of light quality, high strength, multiple environmental protection, insulation and insulation, sound insulation, sound insulation, breathing, fire prevention, fire prevention, rapid construction, and reducing wall costs.
Light -quality partition wall board production process
Step 1: Put the line, the shipping is in place.The axis installed on the light partial wall plate pops up and down the thick dual -line on the upper and lower panels, and the number of boards required to place along the dual -line is placed.Step 2: Installation and board.According to the size required by the wall, first use the whole block when installation, and then cut it with a chainsaw according to the measured size.Step 3: Go to the slurry.After all the installation is installed, first use the bumps of the wall plate to brush the wall plate, and then wipe the dedicated adhesive in the uneven groove of the wall plate and the floor baseline.Step 4: Correction and fixation.Use the diarrhea with a flat and vertical degree of perpendicularity, and then fix it with 6mm or 8mm steel bars.Step 5: The lighting wall plate is installed.Move the wall plate with a good adhesive to the fitting position, stand up to the upper and lower base lines, use the iron crowbar to make the plate and the plate tightly, let the mortar polymer be squeezed out of the joints, and finally use the wooden wedge to use the wooden wedgeFix it.
Light -quality wall board construction plan
I. Construction conditions in the early stage of construction: 1. Check whether the framework meets the specifications and whether the intensity of design standards is met.2. Wash the working surfaces that the floor needs to be carried out and check the density of the floor.3. There are no rough plastering decoration on the wall.The downturn of the floor is not under construction, and the bottom surface must be kept clean.4. The drawings of the places to be constructed and the construction personnel must be made, and the construction personnel must be allowed to know the process of construction.5. For those who specialize in work tasks, we must conduct careful review to meet the level of technical level requirements and implement the construction responsibility to be implemented to people.
Light -quality wall board material
Lightweight outer wall partition wall plate material 1. Cement rock wool clip core plate 2. Cement polyophenylene granular mortar core board 3. Foam cement clip core plate 4. Cement expansion pendant core board economic benefits 1. Light: light: light: light: light: light: light: light: light: light: light: light: lightThe material cost of the mass is 25 yuan per square meter (with 8kg/m foam board), the labor fee is 2 yuan per square meter, the water and electricity cost is 1 yuan, the equipment depreciation fee is 1 yuan, a total of 29 yuan per square meter.2. Price: The market price of lightweight partition wall boards floats at 60 yuan/㎡.
Lightweight wall panel installation
Put the line and the board; the axis of the wall plate pops up and down the thick dual line on the upper and lower panels, and lift it to the side of the wall according to the required specifications.Saw board; arbitrarily lift the chainsaw by hand according to the specifications of the wall.On the slurry; first on the tenon cement of the two plates, and then wipe the polymer mortar on the side of a tenon.Installation; move the prepared panels to be installed to the installation position, correct the wall plate with a sled, tighten the slech, so that the polymer mortar is squeezed out of the connecting Ying to full, and then it is temporarily fixed with a wooden wedge.Correction and fixation; check vertical and flat correction with a ruler of 2 meters or more than 2 meters, and then fix the reinforced steel bars with φ6mm or φ8mm ribs.Swing and pulp; the corrected wall plates are filled with a polymer mortar to fill, scratch, and large stones are filled with fine stone concrete.
Light quality partition price
1. Reference price of GRC Light Wall Board: 65 [㎡] 2. Lightweight partition (ALC board) Reference price: 70.00 yuan/square meter of other light-compact walls price from 40-100 yuan/square meterRice

Related tags： news