HOME > NEWSarticle

Side label lamp work principle 2024-07-22 01:20:43 internet

A type of traffic lights installed on certain aviation labels emit the specified light color and flash frequency (frequency can be 0) at night to achieve the specified irradiation angle and visibility distance to guide the ship of the night line.
The role of the label lamp
The application of LEDs in the aviation barrier lights to ensure that the ship is installed on certain airmarks at night to ensure that the ship is safe at night.There are 4 types of aviation obstacle lamps: fixed lamp, lamp buoy, lamp boat and lighthouse.The fixed lamp, lamp buoy, and lamp boats are the beacon for navigation and warning.The lighthouse sends an awareness signal on the sea day and night for ship measurement positions and a hazardous warning to the ship.LED aviation barriers are a new type of aviation obstacle lamp that has been generally promoted in recent years, and it is becoming more and more valued by the maritime department.It is important to reasonably choose and correctly use LED aviation barriers.In addition to applying the LED light source of the plane to the label lamp, bridge culvert, and rotating lamps, more LED aviation barrier lights are the ring application.At present, the definition of LED aviation barriers to LED aviation barriers to LED aviation barriers in the world still follows two indicators of light intensity and vertical scattered angle of the aircraft surface.
Side label lamp work principle
(1) Have a good horizontal matching characteristics (2) Reasonable vertical scattered angle (3) Advanced driving circuit (4) Has high light/electric conversion efficiency (5) Has a good whole machine protection performance
Voic lantern power
In 1964, it was made into the worlds first aerial label light to generate a wave of power. The working principle was to use the undulating power of the waves to inhale the air into the air chamber, compress it into the studio, and then promote the turbine to drive the generator to generate electricity.When the valve K1 is closed, the K2 is opened; the air with an inhalation pressure of 1.0 × 105Pa (can be regarded as an ideal gas), the overall accumulation of the air in the air room after the inhalation room is 0.8m3. When the sea water rises, the K2 is closed immediately, and the seawater pushes the pistonThe air temperature that is reduced to compress the inhaled air can be considered that the air temperature is unchanged. When the volume of the air is compressed to 0.2m3, the valve K1 is pushed away. The piston continues to promote the air to enter the studio. At the same time, the air in the studio pushes the turbine machineWork, the turbine drives the generator to provide electricity to provide electrical energy to the label lamp. This process turbine drives the generator to work for 5S time.The power obtained by the label lamp is 2.0 × 103W, which is the output power. The total efficiency of the turbine and generator is 80%. Therefore, the power of the air to the turbine w = PTη = 2 × 103 × 50.8J = 1.25 × 104J.
Bid Light Color
A type of traffic lights installed on certain aviation labels on the label lights emit the specified light color and flash frequency (frequency can be 0) at night to achieve the specified exposure angle and visibility distance, and guide the ship of the night line.The lighthouse signal includes two types: fixed signal and flash signal. The fixed signal is to send a directional light with red or green lights within a certain range for ships to distinguish the direction; flash signals are used as recognition signals.
Aviation label lamp model
Product name: THD-155LED aerospace label light product model: THD-155LED163549-699 This product technical parameter: lens: 155mm plastic lens (colorless transparent), polycarbonate plastic forming base: aluminum alloy casting for molding light source: 30 grains of LEDWorking voltage: DC: 10.5V ~ 13V; [1] working current: 100mA ~ 650mA adjustable color: red, green, yellow, white static current:

Related tags: news